NEW H2020 Project Kick-off November 3-4

-  OPEN CALL FOR NEW PhD STUDENTS

-  TWO NEW NATIONAL PROJECTS STARTING (May 1rst,  FCT Funded)

UNDULANT-Next: UNsteaDy boUndary LAyer flow coNTrol using plasma actuators of Next generation

Coordinator: José Páscoa
HyperMHD: Magnetoplasmadynamic Flow Manipulation on Hypersonic and Reentry Vehicles
Coordinator: Carlos Xisto

DATABASE:

http://orcid.org/0000-0001-7019-3766

https://www.scopus.com/authid/detail.uri?authorId=6507778329

http://www.researcherid.com/rid/F-8128-2010

 

International Journals (45)


(P45) M. Abdollahzadeh, José Páscoa, Paulo Jorge Oliveira (2016) "Implementation of the Classical Plasma-Fluid Model for Simulation of the Dielectric Barrier Discharge (DBD) Actuators in OpenFOAM", Volume 128, Computers and Fluids, pp. 77–90.
(P44) Leger J. A., Páscoa J. C., Xisto C. M., (2016) “Aerodynamic optimization of cyclorotors” Aircraft Engineering and Aerospace Technology, Vol. 88, No. 2, pp.232 - 245.
(P43) Xisto C. M., Páscoa J. C., Trancossi M., (2016) “Geometrical Parameters Influencing the Aerodynamic Efficiency of a Small-Scale Self-Pitch High-Solidity VAWT” Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, Vol. 138, No. 3, pp. 8.
(P42) Morgado, J., Vizinho R., Silvestre, M. A. R. and Páscoa, J. C. (2016) “XFOIL vs CFD performance predictions for high lift low Reynolds number airfoils” Aerospace Science and Technology, Vol. 52, pp. 207-214.
(P41) Trancossi M., Stewart J., Dumas A., Madonia M., Pascoa J. (2016) “Constructal Design of an Entropic Wall With Circulating Water Inside” Journal of Heat Transfer, Vol. 138 (8), pp. 9.
(P40) Xisto C., Leger J., Páscoa J. et al. (2016) "Parametric Analysis of a Large-scale Cycloidal Rotor in Hovering Conditions". ASCEs Journal of Aerospace Engineering, in press, DOI: 10.1061/(ASCE)AS.1943-5525.0000658.
(P39) Trancossi M, Madonia M., Dumas A., Angeli D., Bingham C., Das S., Grimaccia F., Páscoa, J. C. et al (2016) “A new aircraft architecture based on the ACHEON Coanda effect nozzle: flight model and energy evaluation” European Transport Research Review, Vol. 8, pp. 1-21.
(P38) Morgado, J., Silvestre, M. A. R. and Páscoa, J. C. (2016) “A Comparison of Post-Stall Models Extended for Propeller Performance Prediction” Aircraft Engineering and Aerospace Technology, Vol. 88, No. 4, pp. 12.
(P37) Shyam S. Das, Jose C. Páscoa, M. Trancossi, A. Dumas (2016) “CFD study on a Novel Propulsion System: ACHEON and Its Integration with an Unmanned aerial Vehicle (UAV)”, ASCEs Journal of Aerospace Engineering, Vol. 29, No. 1, 04015015-1 - 04015015-16.
(P36) A Baptista, F Santos, J Páscoa, N Sändig (2016) “Project Management Methodologies as Main Tool for Current Challenges in Global Economy Driving Historical Changes”, Journal of Advanced Management Science, Vol 4 (2) pp. 1-7.
(P35) Vizinho, R., Páscoa, J., Silvestre, M. (2015) “Turbulent transition modeling through mechanical considerations”, Applied Mathematics and Computation, Vol 269, pp. 308-325.
(P34) Vizinho, R., Morgado, J., Páscoa, J., Silvestre, M. (2015) “Analysis of transitional flow in 3D geometries using a novel phenomenological model”, Aerospace Science and Technology, Vol. 45, pp. 431-441.
(P33) Baptistaa, AA, Charrua-Santos, F, Páscoa, JC (2015) “Prevention and Risk Management in RTD European Projects Developed by University-Company's Consortiums”, Procedia Computer Science, Vol. 64, pp. 403-408.
(P32) Morgado, J., Abdollahzadeh, M., Silvestre, M.A.R., Páscoa, J.C (2015) “High altitude propeller design and analysis”, Aerospace Science and Technology, Vol. 45, pp. 398-407.
(P31) Páscoa, J.C., Xisto, C.M., Oliveira, P.J (2015) “Numerical analysis of real gas MHD flow on two-dimensional self-field MPD thrusters”, Acta Astronautica, Vol. 112, pp. 89-101.
(P30) Silvestre, M.A.R., Morgado, J., Alves, P., Santos, P., Gamboa, P., Páscoa, J.C. (2015) “Propeller performance measurements at low Reynolds numbers”, International Journal of Mechanics, Vol 9, pp. 154-166.
(P29) Ilieva, G., Páscoa, J., Dumas, A., Trancossi, M. (2015) Unsteady interaction effects between an airship and its air-jet propulsion system, Advanced Structured Materials, Vol. 44, pp. 127-143.
(P28) Leger J. A., Páscoa J. C., Xisto C. M., (2015) "Analytical Modeling of a Cyclorotor in Hovering State", Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering, Vol. 229, No. 12, pp. 2163-2177.
(P27) M. Abdollahzadeh, José Páscoa, Paulo Jorge Oliveira, F. Rodrigues (2015) "Numerical Design and Analysis of a Multi-DBD Actuator Configuration for the Experimental Testing of ACHEON Nozzle Model", Aerospace Science and Technology, Vol. 41, pp. 259–273.
(P26) J. Morgado, M. A R. Silvestre, J. C. Páscoa (2015), "Validation of new formulations for propeller analysis", AIAA Journal of Propulsion and Power, Vol. 31 (1), pp. 467-477.
(P25) AAR Baptista, MJM Silva, CM Cabrita, FB Santos, JC Pascoa (2014) “Technology Transfer as a Driver of Cooperation and Communication in a New Knowledge Management Methodology”, Lecture Notes on Information Theory, Vol 2 (3), pp. 259-265.
(P24) Xisto, C.M., Páscoa, J.C., Oliveira, P.J. (2014) "A pressure-based high resolution numerical method for resistive MHD" Journal of Computational Physics, 275, pp. 323-345.
(P23) Das, S., Abdollahzadeh, M., Pascoa, J., Dumas, A., Trancossi, M. (2014) "Numerical modeling of coanda effect in a novel propulsive system", International Journal of Multiphysics, 8 (2), pp. 181-201.
(P22) M Trancossi, A Dumas, SS Das, J Pascoa (2014) “Design methods of Coanda effect nozzle with two streams”, INCAS Bulletin, Vol. 6 (1), pp.  83-95.
(P21) A Dumas, M Subhash, M Trancossi, J Páscoa Marques (2014) “The Influence of Surface Temperature on Coanda Effect”, Energy Procedia, Vol. 45, pp. 626-634.
(P20) Abdollahzadeh, M., Pascoa, J.C., Ranjbar, A.A., Esmaili, Q. (2014) "Analysis of PEM (Polymer Electrolyte Membrane) fuel cell cathode two-dimensional modeling", Energy, Vol. 68, pp. 478-494.
(P19) Abdollahzadeh, M., Páscoa, J.C., Oliveira, P.J. (2014) "Two-dimensional numerical modeling of interaction of micro-shock wave generated by nanosecond plasma actuators and transonic flow" Journal of Computational and Applied Mathematics, Vol. 270, pp. 401-416.
(P18) Abdollahzadeh, M., Páscoa, J.C., Oliveira, P.J. (2014) "Modified split-potential model for modeling the effect of DBD plasma actuators in high altitude flow control", Current Applied Physics, Vol. 14 (8), pp. 1160-1170.
(P17) Ilieva, G., Páscoa, J., Dumas, A., Trancossi, M. (2014) "MAAT - Promising innovative design and green propulsive concept for future airship's transport", Aerospace Science and Technology, Vol. 35 (1), pp. 1-14.
(P16) Vizinho, R., Pascoa, J., and Silvestre, M., (2013) "High Altitude Transitional Flow Computation for a Propulsion System Nacelle of MAAT Airship," SAE International Journal Aerospace, Vol. 6, No. 2, pp.714-720.
(P15) Xisto C.M., Páscoa J. C. , Oliveira P.J. (2013), "A pressure-based method with AUSM-type fluxes for MHD flows at arbitrary Mach numbers", International Journal for Numerical Methods in Fluids, Vol. 72, No. 11, pp. 1165–1182.
(P14) Trancossi M., Dumas A., Madonia M., Páscoa J., Vucinic D. (2012), “Fire-safe airship system design”, SAE International Journal of Aerospace, Vol. 5, No. 1: pp. 11-21.
(P13) Páscoa J. C., Mendes N. M., Brójo F. M., Santos F. S., Fael P. O. (2012) "An innovative experimental on-road testing method and its demonstration on a prototype vehicle", Journal of Mechanical Science and Technology, Vol. 26, No. 6, pp 1663-1670.
(P12) Páscoa J. C., Silva F. J., Pinheiro J. S., Martins D. J. (2012), "A new approach for predicting PAT-pumps operating point from direct pumping mode characteristics", Journal of Scientific & Industrial Research, Vol. 71, pp. 144-148.
(P11) Ilieva G., Páscoa J.C., Dumas A., Trancossi M. (2012), “A critical review of propulsion concepts for modern airships”, Central European Journal of Engineering, Vol. 2, No. 2, pp 189-200.
(P10) Xisto C.M., Páscoa J. C. , Oliveira P.J., Nicolini D.A. (2011), "An hybrid pressure-density based algorithm for the Euler equations at all Mach number regimes", International Journal for Numerical Methods in Fluids, Vol. 70, No. 8, pp. 961–976.
(P9) Páscoa J. C. (2011) "Benchmark test cases for CFD in mechanical engineering", Central European Journal of Engineering, Vol 1(4), pp. 333. (Editorial).
(P8) Páscoa J. C., Silva F. J., Pinheiro J. S., Martins D. J. (2010), "Accuracy details in realistic CFD modeling of an industrial centrifugal pump in direct and reverse modes", Journal of Thermal Science, Vol. 19, No. 6, pp. 491-499.
(P7) Páscoa J. C., Xisto C. M., Göttlich E. (2010), "Performance assessment limits in transonic 3D turbine stage blade rows using a mixing-plane approach", Journal of Mechanical Science and Technology, Vol. 24, No. 10, pp. 2035-2042.
(P6) Páscoa J. C., Mendes A. C., Gato L.M.C. (2009), "A fast iterative inverse method for turbomachinery blade design", Mechanics Research Communications, Vol. 36, No. 5, pp. 537-546.
(P5) Páscoa J. C., Luff J. K., McGuirk J. J., Mendes A. C., (2006), “On Accurate Numerical Modeling of 3D Turbulent Flow Through a DCA Compressor Cascade and its Experimental Validation”, International Journal of Dynamics of Fluids, Vol. 2(1), pp. 1–18.
(P4) Páscoa J. C., Mendes A. C., Gato L.M.C., Elder R., (2004), “Aerodynamic Design of Turbomachinery Cascades Using an Enhanced Time-marching Finite Volume Method”, Journal of Computer Modeling in Engineering & Sciences, Vol. 6(6), pp. 537–546.
(P3) Páscoa J. C., Mendes A. C., Gato L. C., (2004), “An Inverse Method for Turbomachinery Cascades of Blades – Investigation of the existence and uniqueness of solution”, WIT Transactions on Engineering Sciences, Vol. 40, pp. 312-322.
(P2) Páscoa J. C., Mendes A. C., Gato L. C., (2002), “An Efficient Finite Volume Scheme with Improved Artificial Viscosity Suitable for Transonic flow Calculations”, WIT Transactions on Engineering Sciences, Vol. 32, pp. 505-514.
(P1) Mendes A. C., Páscoa J. C., Kolodziej J. A., (1998), “An Alternative Approach to Integral Equation Method Based on Trefftz Solution for Inviscid Incompressible Flow”, WIT Transactions on Engineering Sciences, Vol. 18, pp. 57-68.


Proceedings of International Conferences (48)

(I48) Xisto C., Pascoa J.C., Trancossi M., (2015) “Numerical analysis of design parameters with strong influence on the aerodynamic efficiency of a small-scale self-pitch VAWT”, ASME International Mechanical Engineering Congress & Exposition - IMECE 2015, Houston, November 13–19 2015, ASME Paper IMECE2015-51581, pp. 12.
(I47) Rodrigues F., Pascoa J.C., Dias F., Abdollahzadeh M., (2015) “Plasma Actuators for Boundary Layer Control of Next Generation Nozzles”, ASME International Mechanical Engineering Congress & Exposition - IMECE 2015, Houston, November 13–19 2015, ASME Paper IMECE2015-52193, pp. 8.
(I46) Leger J., Pascoa J. C., Xisto C., (2015) “3D Effects in Cyclorotor Propulsion Systems”, ASME International Mechanical Engineering Congress & Exposition - IMECE 2015, Houston, November 13–19 2015, ASME Paper IMECE2015-52173, pp. 8.
(I45) Trancossi M., Dumas A., Cimarelli A., Pascoa J. C., (2015) “MAAT cruiser/feeder airship design: intrinsic stability and energetic flight model”, ASME International Mechanical Engineering Congress & Exposition - IMECE 2015, Houston, November 13–19 2015, ASME Paper IMECE2015-53301, pp. 16.
(I44) Dias F., Páscoa J., Xisto C., Abdollahzadeh M., Rodrigues F., (2015) “Simulação CFD de alhetas de saída com atuadores DBD para a tubeira HOMER”, In International Conference on Engineering ICEUBI’2015, Covilhã, Portugal, 2-4 Dezembro, Paper No. 10.02, pp. 6.
(I43) Rodrigues F., Páscoa J., Dias F., (2015) “Caracterização da potência consumida por atuadores a plasma DBD para controlo da camada limite”, In International Conference on Engineering ICEUBI’2015, Covilhã, Portugal, 2-4 Dezembro, Paper No. 10.03, pp. 8.
(I42) Trancossi, M., Dumas, A., Niccolai, G., and Pascoa, J., (2015) "Energy Self Sufficient Aircrafts Can Become Reality through New Propulsion Design Approaches," SAE Technical Paper 2015-01-2484, pp. 8.
(I41) Trancossi, M., Bingham, C., Capuani, A., Das, S., Páscoa, J.C. et al., (2015) "Multifunctional Unmanned Reconnaissance Aircraft for Low-Speed and STOL Operations," SAE Technical Paper 2015-01-2465, pp. 10.
(I40) Trancossi, M., Dumas, A., Madonia, M., Subhash, M. Páscoa J.C., (2015) "Preliminary Implementation Study of ACHEON Thrust and Vector Electrical Propulsion on a STOL Light Utility Aircraft," SAE Technical Paper 2015-01-2422, pp. 12.
(I39) Silvestre, M.A.R., Morgado, J., Alves, P., Santos, P., Gamboa, P., Páscoa, J.C. (2015) “Low Reynolds Number Propeller Performance Testing”, 5th WSEAS International Conference on Fluid Mechanics and Heat & Mass Transfer, pp. 1-11.
(I38) Páscoa, J. C., Rodrigues, F., Das, S. S., Abdollahzadeh, M, Dumas, A., Trancossi, M., Subhash, M. (2014), “Exit flow vector control on a Coanda nozzle using dielectric barrier discharge actuator” ASME International Mechanical Engineering Congress & Exposition - IMECE 2014, Montreal, November 14–20 2014, pp. V001T01A006; 8 pages.
(I37) Xisto, C. M., Páscoa, J. C., Leger, J. A., Trancossi, M. (2014), “Wind Energy Production Using An Optimized Variable Pitch Vertical Axis Rotor” ASME International Mechanical Engineering Congress & Exposition - IMECE 2014, Montreal, November 14–20, pp. V001T01A007; 8 pages.
(I36) Xisto, C. M., Páscoa, J. C., Leger, J. A. (2014), “Cycloidal Rotor Propulsion System With Plasma Enhanced Aerodynamics” ASME International Mechanical Engineering Congress & Exposition - IMECE 2014, Montreal, November 14–20, pp. V001T01A005; 8 pages.
(I35) Xisto, C. M., Páscoa, J. C., Leger, J. A., Gerlach, A. (2014) "Multi-Dielectric Barrier Discharge plasma actuator for cycloidal rotor active flow control”, 4th EASN Association International Workshop on Flight Physics and Aircraft Design, Aachen, Germany, October, 27-29.
(I34) Leger, J. A, Páscoa, J. C., Xisto, C. M. (2014) "Aerodynamic Optimization of Cyclorotors”, 4th EASN Association International Workshop on Flight Physics and Aircraft Design, Aachen, Germany, October, 27-29.
(I33) Carlos M Xisto, José C Páscoa, Jakson A Leger, Pierangelo Masarati, Giuseppe Quaranta, Marco Morandini, Louis Gagnon, D Wills, M Schwaiger, (2014) “Numerical modeling of geometrical effects in the performance of a cycloidal rotor”, ECCM 6th European Conference on Computational fluid dynamics, Paper No. P1848, pp. 1 -12.
(I32) Trancossi, M., Dumas, A., Xisto, C. M., Páscoa, J. C., Andrisani, A. (2014), “Roto-Cycloid propelled airship dimensioning and energetic equilibrium” SAE 2014 Aerospace System and Technology Conference, Cincinnati, Ohio, USA, September 23-25, Paper Number 2014-01-2107, pp. 11.
(I31) Gagnon, L., Morandini, M., Quaranta, G., Muscarello, V., Masarati, P., Bindolino, G., Xisto, C. M., Pascoa, J. C. (2014) “Feasibility Assesment: A Cycloidal Rotor to Replace Conventional Helicopter Technology”, Proc. European Rotorcraft Forum 2014, Southampton, UK, September 2–5 2014, pp. 1395-1408.
(I30) Gagnon, L., Quaranta, G., Morandini, M., Masarati, P., Lanz, M., Xisto, C.M., Páscoa, J.C. (2014) "Aerodynamic and aeroelastic analysis of a cycloidal rotor" 44th AIAA Fluid Dynamics Conference, AIAA Paper 2014-2450, pp. 19.
(I29) Xisto, C. M., Páscoa, J. C., and Oliveira, P. J. (2013) “Numerical Modelling of a Self-Field Magnetoplasmadynamic Thruster”, In International Conference on Engineering UBI2013, Covilhã, Portugal, 27-29 Novembro, pp. 10.
(I28) Leger, J. A., Páscoa, J. C., and Xisto, C. M. (2013). “Kinematic and Dynamic Parametric Analysis of Cycloidal Rotor Thrusters”, In International conference on Engineering UBI2013, Covilhã, Portugal, 27-29 Novembro, pp 6.
(I27) Shyam S. Das, J. C. Páscoa, A. Dumas, M. Trancossi (2013). “3D CFD modeling in the Novel ACHEON Propulsion System”, In International Conference on Engineering UBI2013, Covilhã, Portugal, 27-29 Novembro, pp. 8.
(I26) Baptista A.R., Santos F.M.B.C., Páscoa J. C. (2013), “CPM na Gestão de Projectos multinacionais de investigação tecnológica no âmbito Europeu”, In International Conference on Engineering UBI2013, Covilhã, Portugal, 27-29 Novembro, pp. 9.
(I25) Rodrigues F., Páscoa J.C., Dumas A., Trancossi M. (2013), “Preliminary design, setup and testing of a plasma DBD actuator for boundary layer control”, In International Conference on Engineering UBI2013, Covilhã, Portugal, 27-29 Novembro, pp. 6.
(I24) Machado, T., Pascoa, J.C., Brojo, F., Xisto, C. (2013) "Numerical modeling of turbulent transitional MHD flow for boundary layer control", SAE 2013 AeroTech Congress & Exhibition, SAE Technical Paper No. 2013-09-17, pp.8.
(I23) Monteiro, J., Pascoa, J.C., Xisto, C. (2013) "Analytical modeling of a cyclorotor in forward flight" SAE Technical Papers, SAE 2013 AeroTech Congress & Exhibition, SAE Technical Paper No. 2013-01-2271, pp. 10.
(I22) Trancossi, M., Pascoa, J. (2013) "Thermojet: An old idea can define a novel family of jets", SAE 2013 AeroTech Congress & Exhibition, SAE Technical Paper No. 2013-01-2205, pp. 11.
(I21) Xisto, C.M., Páscoa, J.C., Oliveira, P.J. (2013) "Modelling plasma flow on a self-field MPD thruster using a PISO based method", 44th AIAA Plasmadynamics and Lasers Conference, AIAA Paper 2013-2627, pp10.
(I20) Morgado, J., Silvestre, M.A.R., Páscoa, J.C. (2013) "Full range airfoil polars for propeller blade element momentum analysis", 2013 International Powered Lift Conference, AIAA Paper 2013-4379, pp.10.
(I19) Silvestre, M.A.R., Morgado, J., Páscoa, J.C. (2013) "JBLADE: A propeller design and analysis code" 2013 International Powered Lift Conference, AIAA Paper 2013-4220, pp.12.
(I18) Xisto, C.M., Páscoa, J.C., Oliveira, P.J. (2013) "Numerical modelling of electrode geometry effects on a 2D self-field MPD thruster" ASME International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Paper No. IMECE2013-63144, pp. V001T01A051, 10 pages.
(I17) Leger, J.A., Páscoa, J.C., Xisto, C.M.(2013) "Analytic model able to assist in parametric design of cycloidal rotor thrusters" ASME International Mechanical Engineering Congress and Exposition, Paper No. IMECE2013-65238, pp. V001T01A053; 12 pages.
(I16) Abdollahzadeh M., Páscoa J. C. , Oliveira P.J. (2012), "Numerical investigation on efficiency increase in high altitude propulsion systems using plasma actuators", in Proc. European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, Paper No. 3213, pp. 6563-6581.
(I15) Xisto C.M., Páscoa J. C. , Oliveira P.J. (2012), "Introduction of a new algorithm for the MHD equations at all Mach number regimes", in Proc. European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, Paper No. 3212, pp. 6515-6562.
(I14) C.M. Xisto, J.C. Páscoa, P.J. Oliveira, D.A. Nicolini (2011), “Proposal and Testing of a New Hybrid Pressure Density Based Algorithm for MPD Thruster Simulations”, in Proc. Métodos Numéricos em Engenharia 2011, CMNE 2011, APMTAC, pp. 11.
(I13) Xisto C.M., Páscoa J. C. , Oliveira P.J. (2011), "Reformulation of the PISO method for predicting flows at all speeds using AUSM+up flux definitions", in Proc. International Conference on Engineering ICEUBI'2011, pp. 18, Universidade da Beira Interior Portugal.
(I12) Xisto C.M., Páscoa J.C., Oliveira P.J., Nicolini D.A. (2010), "Implementation of a 3D compressible MHD Solver Able to Model Transonic Flows", in Proc. V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010, pp. 14.
(I11) Silva F.J., Páscoa J.C. , Pinheiro J.S., Martins D.J. (2010), "Turbulent Flowstructure Computation Inside a Pump PAT Using an Industrial Benchmark Test Case", in Proc. V European Conference on Computational Fluid Dynamics ECCOMAS CFD 2010, Paper No. 01521, 12 pp.
(I10) Páscoa J.C., Brójo F. M. P., Monteiro J. M. M. (2009), "Numerical Simulation of Magnetoplasma Thrusters for Aerospace Propulsion Using and MHD Formulation", Proc. 14th International Conference on Emerging Nuclear Energy Systems, Instituto Tecnológico e Nuclear, Paper O7.2, pp. 6.
(I9) Monteiro J. M. M., Páscoa J. C., Brójo F . M. R. P. (2009), "Simulation of the Aerodynamic Behavior of a Micro Wind Turbine", Proc. ICREPQ'09International Conference on Renewable Energies and Power Quality, European Association for the Development of Renewable Energies, Environment and Power Quality, Paper No. 368, pp. 6.
(I8) Páscoa J. C., Xisto C. M. C. (2008), "Computational Modeling of Sweep and Lean Effects on 3D Turbine Blades for Performance assessment", Proc. ENCIT 2008 12th Brazilian Congress of Thermal Engineering and Sciences, Associação Brasileira de Engenharia eCiências Mecânicas, pp. 8.
(I7) Páscoa J. C., Mendes A. C., Gato L. M. C. (2008), “Redesigning Annular Turbine Blade Rows Using a Viscous-Inviscid Inverse Design Method”, Proc. ASME Turbo Expo 2008, ASME Paper GT2008-50313, pp. 2209-2217.
(I6) Páscoa J. C., Mendes A. C., (2006), “Turbine Blade Duty Re-Design by Controlling Lean and Sweep Using an Innovative Iterative Inverse Design Method”, Proc.
ASME Turbo Expo 2006, ASME Paper GT2006-90266, pp. 6.
(I5) Páscoa J. C., Mendes A. C., (2005), “A Imposição da Carga num Método de Projecto Aerodinâmico de Pás de Turbomáquinas”, Proc. VII Congreso de Metodos Numéricos en la Ingenieria (em CD), Universidad de Granada, pp. 12.
(I4) Páscoa J. C., Mendes A. C., Gato L. C., (2004), “An Improved Inverse Design Method for Blades of Finite Thickness”, Proc. International Conference on Computational & Experimental Engineering and Sciences (Ed.: S.N. Atluri; A.J.B. Tadeu), pp. 581-586,TechScience Press.
(I3) Páscoa J. C., Mendes A. C., Gato L. C., Borges J.E.T., (2003), “Um Método Numérico para Projecto de Cascatas de Pás de Turbomáquinas em Regime Transónico”, Proc. VI Congresso IberoAmericano de Engenharia Mecânica – CIBEM 6, Universidade de Coimbra, pp. 1537-1542.
(I2) Mendes A. C., Martins A. M., Marques B. T., Páscoa J. C., (2003), “Projecto e Análise de Desempenho do Rotor de um Ventilador Axial Industrial”, Proc. VI Congresso IberoAmericano de Engenharia Mecânica – CIBEM 6, Universidade de Coimbra, pp. 1531-1536.
(I1) Páscoa J. C., Mendes A. C., Gato L. C., (2002), “Projecto de Cascatas de Pás Rectilíneas Através de um Método Inverso Baseado na Resolução das Equações de Euler”, Proc. V Congreso de Metodos Numéricos en la Ingenieria (em CD), Universidad Politecnica de Madrid, pp. 13.


Proceedings of National Conferences (16)

 

(N-16) Abdollahzadeh M., Páscoa J.C., Oliveira P.J. (2012), “Numerical Modeling of Boundary Layer Control Using Dielectric Barrier Discharge”, in Proc. Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia - MEFTE 2012, Paper Nº 61, pp. 1-10.
(N-15) Oliveira R., Páscoa A., Silvestre M. (2012), “Preliminary assessment of transitional flow modeling using low-Re turbulence closures”, in Proc. Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia - MEFTE 2012, Paper Nº 59, pp. 1-10.
(N-14) Ilieva G., Páscoa A., Dumas A. Trancossi M. (2012), “Numerical analysis of aerodynamic performance and propulsion needs for an innovative airship”, in Proc. Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia - MEFTE 2012, Paper Nº 57, pp. 1-10.
(N-13) Silvestre M.,  Morgado J., Páscoa J. (2012), “Parametric Study of a High Altitude Airship According to the Multi-Body Concept for Advanced Airship Transport - MAAT”, in Proc. Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia - MEFTE 2012, Paper Nº 90, pp. 1-10.
(N-12) Xisto C.M., Páscoa J.C., Oliveira P.J. (2012), “Preliminary assessment of a new algorithm for the MHD equations at all Mach number regimes”, in Proc. Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia - MEFTE 2012, Paper Nº 12, pp. 1-10.
(N-11) Monteiro P., Páscoa J. C., Brójo F., André J., Monteiro J, (2009), "A wind turbine system for battery charging", Proc. Conferência Engenharia'2009, Paper ENG-09-20.4, 6 pgs, Universidade da Beira Interior, Portugal.
(N-10) Oliveira M. C., Páscoa J. C., (2009), "Experimental set-up to analyze the flow on Tesla pumps for MEMS applications", Proc. Conferência Engenharia'2009, Paper ENG-09-20.2, 6 pgs, Universidade da Beira Interior, Portugal.
(N-9) Xisto C. M., Páscoa J. C., Goettlich E., (2009), "Computational modeling of secondary flows in single blade rows and performance assessment in 3D turbine stages computations using wall functions", Proc. Conferência Engenharia'2009, Paper ENG-09-24.1, 5pgs, Universidade da Beira Interior, Portugal.
(N-8) Oliveira M. C., Páscoa J. C., (2009), "Analytical and experimental modeling of a viscous disc pump for  MEMS applications'', Proc. III Conferência nacional em mecânica de fluidos, termodinâmica e energia, Associação Portuguesa de Mecânica Teórica Aplicada e Computacional, 6 pgs, Instituto Politécnico de Bragança.
(N-7) Xisto C. M., Páscoa J. C., (2009), "Limitations of performance assessment in 3D turbine stage computations using wall functions with high and low-Re turbulence models", Proc. III Conferência nacional em mecânica de fluidos, termodinâmica e energia, Associação Portuguesa de Mecânica Teórica Aplicada e Computacional, 6 pgs, Instituto Politécnico de Bragança.
(N-6) Páscoa J. C., Mendes A. C., (2005), “Um Modelo Numérico para a Caracterização do Escoamento Tri-Dimensional em Turbomáquinas”, Artigo ENG-05-18.1, Congresso Engenharia’2005 – Inovação e Desenvolvimento, 6 pgs., Universidade da Beira Interior.
(N-5) Páscoa J. C., Mendes A. C., Gato L. C., (2003), “Unicidade e Existência de Solução para uma Formulação Inversa de Projecto Aerodinâmico de Cascatas de Pás de Turbomáquinas em Regime Transónico”, Artigo ENG-03-02-04, Congresso Engenharia’2003 – Inovação e Desenvolvimento, 6 pgs., Universidade da Beira Interior.
(N-4) Páscoa J. C., Luff J. K., McGuirk J. J., Mendes A. C., (2003), “Application of the Rolls-Royce Hydra CFD Code to the Analysis of a Benchmark Test Case for Flow Around Turbomachinery Blades”, Proc. VII Congresso de Mecânica Aplicada e Computacional, pp 1041-1050, Universidade de Évora.
(N-3) Páscoa J. C., Mendes A. C., Gato L. C., (2001), “Desenvolvimento e Validação de um Algoritmo para o Cálculo do Escoamento Compressível Transónico em Cascatas de Pás de Turbomáquinas”, Congresso Engenharia’2001-Inovação e Desenvolvimento, pp. 55-61, Universidade da Beira Interior.
(N-2) Páscoa J. C., Mendes A. C., (1999), "Desenvolvimento de um Sistema de Controlo e Aquisição de Dados para uma Scanivalve e Aplicação ao Estudo das Características de um Ventilador Axial", Proc. Seminário de Engenharia Electromecânica - Novos Temas de Investigação, pp. 75-81, Universidade da Beira Interior.
(N-1) Páscoa J. C., Mendes A. C., (1997), “Determinação Numérica e Validação Experimental dos Coeficientes Aerodinâmicos em Torno de um Perfil Simétrico a Baixo Número de Reynolds”, Proc. V Encontro Nacional de Mecânica Computacional, p. 863-871, Universidade do Minho, 1997.

SPECIAL ISSUE OF CEJE
Coordinating Editor:
J. C. Páscoa

Support: