{"id":1762,"date":"2025-02-03T00:05:18","date_gmt":"2025-02-03T00:05:18","guid":{"rendered":"https:\/\/clusterdem.ubi.pt\/?page_id=1762"},"modified":"2026-07-26T10:07:29","modified_gmt":"2026-07-26T10:07:29","slug":"international-journal-articles","status":"publish","type":"page","link":"https:\/\/clusterdem.ubi.pt\/?page_id=1762","title":{"rendered":"International Journal Articles"},"content":{"rendered":"\n
\n

International Journal Articles<\/h1>\n

Chronological index of peer-reviewed high-impact research papers published by ClusterDEM faculty.<\/p>\n<\/div>\n\n\n\n

\n\n \n
\n

\n \ud83d\udcca<\/span> Publication Output Analytics\n <\/h3>\n \n
\n
\n 48<\/span>\n Total Papers<\/span>\n <\/div>\n <\/div>\n\n

Annual Production Breakdown<\/h4>\n
\n
2026<\/span>0<\/strong><\/div>\n
2025<\/span>0<\/strong><\/div>\n
2024<\/span>0<\/strong><\/div>\n
2023<\/span>0<\/strong><\/div>\n
2022<\/span>0<\/strong><\/div>\n
2021<\/span>0<\/strong><\/div>\n
2020<\/span>0<\/strong><\/div>\n
2011 – 2019<\/span>0<\/strong><\/div>\n
\n < 2011<\/span>\n 0<\/strong><\/div>\n <\/div>\n <\/div>\n\n \n
    \n \n \n
  1. Ebrahimi, F., Kermani, M.J., Hasheminasab, M. R., & Abdollahzadehsangroudi, M.(2026). Experimental investigation of water management in PEM fuel cells for efficient hydrogen-to-electricity conversion through simultaneous anode and cathode visualization and image processing, International Journal of Hydrogen Energy, 259, 156667 [DOI Link]<\/a>
  2. Benmoussa, A., Candido, S., Pendar, M. R., & P\u00e1scoa, J. C. (2026). Numerical investigation of electrospray plume control using high-voltage ring conductors. Journal of Aerosol Science, 106814.[DOI Link]<\/a>
  3. Pastro, K., Benmoussa, A., Awazu, R., Rodrigues, F., & Abdollahzadehsangroudi, M. (2026). Numerical Analysis of a Hybrid Turbine with Partial-Height Blades: Performance Gains Beyond Viscous Gap-Reduction. Fluids, 11(7), 166.[DOI Link]<\/a>
  4. Bagherighajari,F., P\u00e1scoa, J.C., & Abdollahzadehsangroudi, M. (2026). Numerical Analysis of a Hybrid Turbine with Partial-Height Blades: Performance Gains Beyond Viscous Gap-Reduction. International Journal of Heat and Mass Transfer, 271, 129301.[DOI Link]<\/a>
  5. Benmoussa, A., Pastro, K., Awazu, R., & Abdollahzadehsangroudi, M. (2026). Numerical analysis of energy conversion performance in a Tesla turbine: influence of injector design and operating conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 48(1), 2694648.[DOI Link]<\/a>
  6. Moghadam, H. A., Dolati, F., Bagherighajari, F., & Taromsari, M. M. (2026). Parametric investigation of a solid-porous fin design for microchannel thermal performance improvement. International Journal of Heat and Fluid Flow<\/em>, 118, 110210.[DOI Link]<\/a>
  7. Gerdroodbary, M. B., & Pascoa, J. C. (2026). Predictive Surrogate Model for estimation of the fuel mixing of transient transverse hydrogen jet at supersonic flow. Acta Astronautica<\/em>.[DOI Link]<\/a>
  8. Teixeira, O., & P\u00e1scoa, J. (2026). Sensitivity of Hypersonic MHD Flow Control to the Surface Catalytic Properties of a Reentry Body. Journal of Aerospace Engineering<\/em>, 39(1), 04025108.[DOI Link]<\/a>
  9. Bagherighajari, F., Abdollahzadehsangroudi, M., & Pascoa, J. C. (2026). Surface dielectric barrier discharge plasma actuators for flame stabilization and combustion control: mechanisms, design trends, and future directions. Fuel<\/em>, 424, 139348.[DOI Link]<\/a>
  10. Khodkameh, M., Amanifard, N., Dolati, F., & Abdollahzadehsangroudi, M. (2026). Optimization of Sweeping Jet Cooling via Fluidic Oscillator: A Parametric Study. European Journal of Mechanics-B\/Fluids<\/em>, 204513.[DOI Link]<\/a>
  11. Farreamini, F., Mahmoudimehr, J., Abdollahzadehsangroudi, M., & Dolati, F. (2025). Numerical investigation of performance of an interdigitated polymer electrolyte membrane fuel cell with a porous rib. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy<\/em>, 09576509261418828.[DOI Link]<\/a>
  12. Martinho, D. L., Abdollahzadehsangroudi, M., Araya, S. S., & Berning, T. (2025). Eulerian-Eulerian CFD Modeling of Multiphase Flow and Heat Transfer in Alkaline Electrolysis Cells. Journal of The Electrochemical Society<\/em>, 172(6), 064501.[DOI Link]<\/a>
  13. Mbanguine, L., Rodrigues, F., & P\u00e1scoa, J. (2025). Experimental analysis of dielectric thickness influence on novel electro-active polymer plasma actuators (EAP-PA) for flow control and ice removal systems. Sensors and Actuators A: Physical<\/em>, 392, 116706.[DOI Link]<\/a>
  14. Gomes, D., Esp\u00edrito Santo, A., & P\u00e1scoa, J. C. (2025). A sparse and decoupled supervision framework for multi-field reconstruction in turbulent flows using physics-informed neural networks. Physics of Fluids<\/em>, 37(7), 075113.[DOI Link]<\/a>
  15. Shvydyuk, K. O., Rodrigues, F. F., Nunes-Pereira, J., P\u00e1scoa, J. C., & Silva, A. P. (2025, March). Thermal Characterization of Ceramic Composites for Optimized Surface Dielectric Barrier Discharge Plasma Actuators. In Actuators<\/em> (Vol. 14, No. 3, p. 127). MDPI. [DOI Link]<\/a>
  16. Nunes, G., Moreira, M., Rodrigues, F., & P\u00e1scoa, J. (2025, March). Experimental Analysis of Electrohydrodynamic Jet Actuation Modes Based on the Phase Doppler Technique. In Actuators<\/em> (Vol. 14, No. 3, p. 141). MDPI. [DOI Link]<\/a>
  17. Pendar, M. R., C\u00e2ndido, S., P\u00e1scoa, J. C., & Lima, R. (2025). Enhancing Automotive Paint Curing Process Efficiency: Integration of Computational Fluid Dynamics and Variational Auto-Encoder Techniques. Sustainability<\/em>, 17(7), 3091. [DOI Link]<\/a>
  18. Teixeira, O., P\u00e1scoa, J., & Purpura, C. (2025). Numerical model validation and aerodynamic MHD performance assessment with novel designs of contoured nozzles for hypersonic plasma wind tunnel testing. Aerospace Science and Technology<\/em>, 164, 110439.[DOI Link]<\/a>
  19. Teixeira, O., & P\u00e1scoa, J. (2025). Numerical Analysis of a Hypersonic Body Under Thermochemical Non-Equilibrium and Different Catalytic Surface Conditions. Actuators<\/em>, 14(2), 102. [DOI Link]<\/a><\/li>\n \n
  20. Moreira, M., Rodrigues, F., & P\u00e1scoa, J. (2025). An experimental study on the use of dielectric barrier discharge plasma actuators for electrospray dynamics enhancement. Physics of Fluids<\/em>, 37(2). [DOI Link]<\/a>
  21. Mbanguine, L., Rodrigues, F., & P\u00e1scoa, J. (2025). New Electro-Active Polymers-Based Plasma Actuators for Simultaneous Flow Control and Ice Protection. Journal of Fluids Engineering<\/em>, 1-31. [DOI Link]<\/a>
  22. Benmoussa, A., Pendar, M. R., & P\u00e1scoa, J. C. (2025). Enhancing electrostatic spray-painting efficiency with modified high-voltage conductors: A numerical study on pulsed electric fields. Journal of Aerosol Science<\/em>, 184, 106491. [DOI Link]<\/a>
  23. Trancossi, M., & Pascoa, J. (2025). Energy and exergy analysis based design of a series hybrid electric vehicle (No. 2025-01-8596). SAE Technical Paper<\/em>.<\/li>\n \n
  24. Bagherighajari, F., Abdollahzadehsangroudi, M., & P\u00e1scoa, J.C. (2025). “Methane\/Air Flame Control in Non-Premixed Bluff Body Burners Using Ring-Type Plasma Actuators”, Actuators<\/em>, 14 (2), 47. [DOI Link]<\/a>
  25. Chekifi, T., Boukraa, M., & Benmoussa, A. (2024). Artificial Intelligence for thermal energy storage enhancement: A Comprehensive Review. Journal of Energy Resources Technology<\/em>. [DOI Link]<\/a>
  26. Chekifi, T., Benmoussa, A., & Boukraa, M. (2024). Desalination Powered by Renewables: A Challenge and an AI Opportunity. Water Resources Management<\/em>, 1-43. [DOI Link]<\/a>
  27. Teixeira, O., & Pascoa, J. (2024). Computational Modelling of Hypersonic Nozzles: The Influence of Enthalpy on the Flow Thermochemistry (No. 2024-01-1935). SAE Technical Paper<\/em>. [DOI Link]<\/a>
  28. C\u00e2ndido, S., & P\u00e1scoa, J. C. (2024). Data-driven surrogate modelling of multistage Taylor cone\u2013jet dynamics. Physics of Fluids<\/em>, 36(5).[DOI Link]<\/a>
  29. Trancossi, M., Pascoa, J., & Catellani, T. (2024). Guidelines Toward an Expansive Exergy-Based Fiscal System That Encourages Energy Transition and Societal Wellness. International Journal of Sustainable Development & Planning<\/em>, 19(11).[DOI Link]<\/a>
  30. Barzegar Gerdroodbary, M., Shiryanpoor, I., Salavatidezfouli, S., Abazari, A. M., & Pascoa, J. C. (2024). Optimizing aerodynamic stability in compressible flow around a vibrating cylinder with deep reinforcement learning. Physics of Fluids<\/em>, 36(12).[DOI Link]<\/a>
  31. Benmoussa, A., & P\u00e1scoa, J. C. (2024). A Chamfered Anchor Impeller Design for Enhanced Efficiency in Agitating Viscoplastic Fluids. Fluids<\/em>, 9(12), 288.[DOI Link]<\/a>
  32. Loureiro Martinho, D., Abdollahzadehsangroudi, M., & Berning, T. (2024). “Computational Fluid Dynamics Analysis of Gas Crossover in an Alkaline Electrolyzer Using a Multifluid Model”, ECS Transactions<\/em>, 114 (5), 727. [DOI Link]<\/a>
  33. Rodrigues, F., Moreira, M., & P\u00e1scoa, J. (2024). Characterization of Plasma-Induced Flow Thermal Effects for Wind Turbine Icing Mitigation. Energies<\/em>, 17(16), 3974. [DOI Link]<\/a>
  34. Shvydyuk, K. O., Nunes-Pereira, J., Rodrigues, F. F., P\u00e1scoa, J. C., Lanceros-Mendez, S., & Silva, A. P. (2024). Holistic Characterization of MgO-Al2O3, MgO-CaZrO3, and Y2O3-ZrO2 Ceramic Composites for Aerospace Propulsion Systems. Ceramics<\/em>, 7(1), 364-384. [DOI Link]<\/a>
  35. Rodrigues, F. F., Shvydyuk, K. O., Nunes-Pereira, J., P\u00e1scoa, J. C., & Silva, A. P. (2024). Plasma Actuators Based on Alumina Ceramics for Active Flow Control Applications. Ceramics<\/em>, 7(1), 192-207. [DOI Link]<\/a>
  36. Periyadurai, K., Pascoa, J. C., Abdollahzadehsangroudi, M., & Oliveira, P. J. (2024). Numerical modeling of magnetohydrodynamic non-Newtonian flow in a cross-slot. Polym Eng Sci<\/em>; 64(5): 2157-2177. [DOI Link]<\/a>
  37. Sheibani, M., Malek Jafarian, S. M., & Abdollahzadehsangroudi, M. (2024). “Impact of annular nanosecond plasma actuators on drag reduction in transonic flow”, Physics of Fluids<\/em>, 36, 116121. [DOI Link]<\/a>
  38. Abdollahzadehsangroudi, M., Francisco, M., Lopes, R., Dolati, F., Pascoa, J.C., & Rodrigues, F. (2024). “Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance”, Physics of Fluids<\/em>, 36, 042015. [DOI Link]<\/a>
  39. Trancossi, M., & Pascoa, J. C. (2024). Toward an integrated forcing, exergetic and constructal analysis of climate change and definition of the possible mitigation measures. International Journal of Environmental Impacts, 7(4), 803-820.[DOI Link]<\/a>
  40. Chekifi, T., Benmoussa, A., & Boukraa, M. (2024). Desalination powered by renewables: A challenge and an AI opportunity. Water Resources Management, 38(14), 5419-5461.[DOI Link]<\/a>
  41. Trancossi, M., Pascoa, J., & Catellani, T. (2023). EXERGY, ECOLOGY, AND DEMOCRACY-CONCEPTS OF A VITAL SOCIETY OR A PROPOSAL FOR AN EXERGY TAX 30 YEARS AFTER, Part 2–Exergy and UN Sustainable Development Goals. Thermal Science, 27(3B), 2359.[DOI Link]<\/a>
  42. Trancossi, M., Pascoa, J., & Catellani, T. (2023). EXERGY, ECOLOGY, AND DEMOCRACY-CONCEPTS OF A VITAL SOCIETY OR A PROPOSAL FOR AN EXERGY TAX 30 YEARS AFTER, Part 1-Generalities. Thermal Science, 27(2B), 1337.[DOI Link]<\/a>
  43. Benmoussa, A. (2023). Agitation of Viscoplastic Fluid in a Rotating Vessel Using Close Clearance Agitators. Eng<\/em>, 4(4), 2525-2541. [DOI Link]<\/a>
  44. Shvydyuk, K. O., Nunes-Pereira, J., Rodrigues, F. F., & Silva, A. P. (2023). Review of ceramic composites in aeronautics and aerospace: A multifunctional approach for TPS, TBC and DBD applications. Ceramics<\/em>, 6(1), 195-230. [DOI Link]<\/a>
  45. Mohammadi, A., Dolati, F., Hassani, F., P\u00e1scoa, J.C., & Abdollahzadehsangroudi, M. (2023). Numerical Analysis and Optimization of Heat Transfer Enhancement on a Flat Plate by an EHD Jet. International Journal of Heat and Mass Transfer<\/em>, 217, 124707. [DOI Link]<\/a>
  46. Diogo Loureiro Martinho, Torsten Berning, Mohammadmahdi Abdollahzadehsangroudi, Anders R\u00f8nne Rasmussen, Jakob H\u00e6rvig and Samuel Simon Araya (2023). A Three-Dimensional, Multiphysics Model of An Alkaline Electrolyzer. ECS Trans.<\/em>, 112, 433. [DOI Link]<\/a>
  47. Benmoussa, A., Rodrigues, F.F., & P\u00e1scoa, J.C. (2023). “Plasma Actuators for Cycloidal Rotor Thrust Vectoring Enhancement in Airships”, Actuators<\/em>, 12(12), 436. [DOI Link]<\/a>
  48. C\u00e2ndido, S., & P\u00e1scoa, J.C. (2023). “On modal decomposition as surrogate for charge-conservative EHD modelling of Taylor Cone jets”, International Journal of Engineering Science<\/em>, 193, 103947. [DOI Link]<\/a>
  49. Khasare, S., Bagherighajari, F., Dolati, F., Pascoa, J.C., & Abdollahzadeh, M. (2023). “Control of the flame and flow characteristics of a non-premixed bluff body burner using dielectric barrier discharge plasma actuators”, Applied Thermal Engineering<\/em>, 235, 121432. [DOI Link]<\/a>
  50. Shvydyuk, K.O., Rodrigues, F.F., Nunes-Pereira, J., Lanceros-Mendez, S., & Silva, A.P. (2023). “Long-lasting ceramic composites for surface dielectric barrier discharge plasma actuators”, Journal of the European Ceramic Society<\/em>, 43(14), pp. 6112-6121. [DOI Link]<\/a>
  51. Bagherighajari, F., Moradi Bilondi, A., Abdollahzadehsangroudi, M., Hamrang, A., & P\u00e1scoa, J.C. (2023). “A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate-blocked interdigitated flow field designs”, Fuel Cells<\/em>, 23(4), pp. 304-322. [DOI Link]<\/a>
  52. Khasare, S., Bagherighajari, F., Dolati, F., P\u00e1scoa, J., & Abdollahzadehsangroudi, M. (2023). “The effect of the dielectric barrier discharge plasma actuator in the control of non-reactive flow in a non-premixed bluff body burner”, Physics of Fluids<\/em>, 35(7), 075135. [DOI Link]<\/a>
  53. Pendar, M.-R., C\u00e2ndido, S., & P\u00e1scoa, J.C. (2023). “Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset”, Physics of Fluids<\/em>, 35(7), 075119. [DOI Link]<\/a>
  54. C\u00e2ndido, S., & P\u00e1scoa, J.C. (2023). “Dynamics of three-dimensional electrohydrodynamic instabilities on Taylor cone jets using a numerical approach”, Physics of Fluids<\/em>, 35(5), 052110. [DOI Link]<\/a>
  55. Hamrang, A., Abdollahzadeh, M., Bilondi, A.M., Rahgoshay, S.M., & Pascoa, J.C. (2023). “Comparison of PEMFC performance with parallel serpentine and parallel serpentine-baffled flow fields under various operating and geometrical conditions; a parametric study”, International Journal of Hydrogen Energy<\/em>, 48(20), pp. 7442-7459. [DOI Link]<\/a>
  56. Teixeira, O., & P\u00e1scoa, J. (2023). “Catalytic wall effects for hypersonic nozzle flow in thermochemical non-equilibrium”, Acta Astronautica<\/em>, 203, pp. 48-59. [DOI Link]<\/a>
  57. Benmoussa, A., & P\u00e1scoa, J.C. (2023). “Enhancement of a cycloidal self-pitch vertical axis wind turbine performance through DBD plasma actuators at low tip speed ratio”, International Journal of Thermofluids<\/em>, 17, 100258. [DOI Link]<\/a>
  58. Rodrigues, F., Abdollahzadehsangroudi, M., Nunes-Pereira, J., & P\u00e1scoa, J. (2023). “Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation”, Actuators<\/em>, 12(1), 5. [DOI Link]<\/a>
  59. Moreira, M., Rodrigues, F., C\u00e2ndido, S., Santos, G., & P\u00e1scoa, J. (2023). “Development of a Background-Oriented Schlieren (BOS) System for Thermal Characterization of Flow Induced by Plasma Actuators”, Energies<\/em>, 16(1), 540. [DOI Link]<\/a>
  60. Moradi Bilondi, A., Bagherighajari, F., Abdollahzadehsangroudi, M., Kermani, M.J., & P\u00e1scoa, J.C. (2022). “The Role of Porous Carbon Inserts on the Performance of Polymer Electrolyte Membrane Fuel Cells: A Parametric Numerical Study”, Energy Technology<\/em>, 10(12), 2200966. [DOI Link]<\/a>
  61. Hamrang, A., Abdollahzadeh, M., Kermani, M. J., & Rahgoshay, S. M. (2022). Numerical simulation of the PEM fuel cell performance enhancement by various blockage arrangement of the cathode serpentine gas flow channel outlets\/inlets. International Journal of Heat and Mass Transfer<\/em>, 186, 122475. [DOI Link]<\/a>
  62. Bagherighajari, F., Abdollahzadehsangroudi, M., Esmaeilpour, M., Dolati, F., & P\u00e1scoa, J. (2022). “Novel converging-diverging microchannel heat sink with porous fins for combined thermo-hydraulic performance”, Physics of Fluids<\/em>, 34(11), 0118700. [DOI Link]<\/a>
  63. Pendar, M.-R., Rodrigues, F., P\u00e1scoa, J.C., & Lima, R. (2022). “Review of coating and curing processes: Evaluation in automotive industry”, Physics of Fluids<\/em>, 34(10), 101301. [DOI Link]<\/a>
  64. Bagherighajari, F., Ramiar, A., Abdollahzadehsangroud, M., Pascoa, J., & Oliveira, P. (2022). “Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields”, International Journal of Energy Research<\/em>, pp. 23. [DOI Link]<\/a>
  65. Pendar, R., & P\u00e1scoa, J. (2022). “Numerical Investigation of Plasma Actuator Effects on Flow Control Over a Three-Dimensional Airfoil With a Sinusoidal Leading Edge”, Journal of Fluids Engineering<\/em>, 144(8): 081208. [DOI Link]<\/a>
  66. M. Abdollahzadeh, F. Rodrigues, J. Nunes-Pereira, J.Pascoa, & L. Pires (2022). “Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application”, Sensors and Actuators: A. Physical<\/em>, pp. 1-25. [DOI Link]<\/a>
  67. Trancossi, M., Pascoa, J.C., & Sharma, S. (2022). “Response to Comment on: A Critical Review on Heat and Mass Transfer Modelling of Viral Infection and Virion Evolution the Case of SARS-COV2”, Thermal Science<\/em>, 26(2), pp. 1219-1228. [DOI Link]<\/a>
  68. J. Nunes-Pereira, F. Rodrigues, M. Abdollahzadeh, S. Lanceros-Mendez, & J. P\u00e1scoa (2021). “Improved performance of polyimide Cirlex-based dielectric barrier discharge plasma actuators for flow control”, Polymers for Advanced Technologies<\/em>, pp. 1-13. [DOI Link]<\/a>
  69. Pendar, R., & P\u00e1scoa, J. (2021). “Numerical analysis of charged droplets size distribution in the electrostatic coating process: Effect of different operational conditions”, Physics of Fluids<\/em>, 33, 033317-24. [DOI Link]<\/a>
  70. M Rami, & J P\u00e1scoa (2021). “Active control assessments towards optimizing the performance of a cycloidal rotor at hover”, Aerospace Science and Technology<\/em>, 119, pp. 107141-16. [DOI Link]<\/a>
  71. Trancossi M., Pascoa J., & Mazzacurati S. (2021). “Sociotechnical design a review and future interdisciplinary perspectives involving thermodynamics in today societal contest”, International Journal of Heat and Mass Transfer<\/em>, 128, pp. 105622-13. [DOI Link]<\/a>
  72. M Rami, & J P\u00e1scoa (2021). “Coupled Active Control Technique for Oscillating Blades in a Cycloidal Rotor Using CFD and ANN Analysis by Including 3D End Wall Effects”, ASCE’s Journal of Aerospace Engineering<\/em>, 34(6), pp. 17. [DOI Link]<\/a>
  73. A Benmoussa, & J P\u00e1scoa (2021). “Performance improvement and start-up characteristics of a cyclorotor using multiple plasma actuators”, Meccanica<\/em>, pp. 24. [DOI Link]<\/a>
  74. A Benmoussa, & J P\u00e1scoa (2021). “Cycloidal rotor coupled with DBD plasma actuators for performance improvement”, Aerospace Science and Technology<\/em>, pp. 14. [DOI Link]<\/a>
  75. M. Trancossi, C. Carli, G. Cannistraro, J. P\u00e1scoa, & S. Sharma (2021). “Could thermodynamics and heat and mass transfer research produce a fundamental step advance toward and significant reduction of SARS-COV-2 spread?”, International Journal of Heat and Mass Transfer<\/em>, pp. 16 (in press<\/em>). [DOI Link]<\/a>
  76. M Rami, & J P\u00e1scoa (2021). “Performance Optimization of Forward-Flight and Lift-Up Phases in a Cycloidal rotor Using an Active Control Mechanism”, ASCE’s Journal of Aerospace Engineering<\/em>, 34(4), pp. 18. [DOI Link]<\/a>
  77. Rodrigues, F., Abdollahzadeh, M., Pascoa, J., & Oliveira, P. (2021). “An experimental study on segmented-encapsulated electrode dielectric-barrier-discharge plasma actuator for mapping ice formation on a surface: A conceptual analysis”, ASME Journal of Heat Transfer<\/em>, 143(1): 011701, pp. 14. [DOI Link]<\/a>
  78. Trancossi, M., & Pascoa, J. (2020). Accounting thermal exchanges in coanda effect. AeroTech 285222.[DOI Link]<\/a>
  79. Abdollahzadeh, M., Rodrigues, F., & Pascoa, J. (2020). “Simultaneous Ice Detection and Removal Based on Dielectric Barrier Discharge Actuators”, Sensors and Actuators: A. Physical<\/em>, 315, 112361. [DOI Link]<\/a>
  80. Trancossi, M., Cannistraro, G., & Pascoa, J. (2020). “Comments on \u201cNew insight into the definitions of the Bejan number\u201d”, International Communications in Heat and Mass Transfer<\/em>, 10. [DOI Link]<\/a>
  81. Pendar, R., & P\u00e1scoa, J. (2020). “Numerical modeling of the distribution of virus carrying saliva droplets during sneeze and cough”, Physics of Fluids<\/em>, 32, pp. 083305. [DOI Link]<\/a>
  82. Pendar, R., & P\u00e1scoa, J. (2020). “Atomization and Spray Characteristics around an ERBS Using Various Operational Models and Conditions: Numerical Investigation”, International Journal of Heat and Mass Transfer<\/em>, 161, pp. 120243. [DOI Link]<\/a>
  83. Amanifard, N., Abdollahzadeh, M, Moayedi, H., & Pascoa, J. (2020). “An explicit CFD model for the DBD plasma actuators using wall-jet similarity Approach”, Journal of Electrostatics<\/em>, 107, pp. 103497. [DOI Link]<\/a>
  84. Trancossi, M., Cannistraro, G., & Pascoa, J. (2020). “Thermoelectric and solar heat pump use toward self sufficient buildings: The case of a container house”, Thermal Science and Engineering Progress<\/em>, vol. 18, pp. 100509. [DOI Link]<\/a>
  85. Rodrigues, F., & P\u00e1scoa, J. (2020). “Implementation of stair-shaped dielectric layers in micro and macro plasma actuators for increased efficiency and lifetime”, Journal of Fluids Engineering<\/em>. [DOI Link]<\/a>
  86. Pendar, M. and Pascoa, J. (2020). “Numerical Investigation of Electrostatic Spray Painting Transfer Processes for Vehicle Coating,” SAE International Journal Advances & Current Practice in Mobility<\/em>, 2(2):747-754. [DOI Link]<\/a>
  87. Rami, M., & Pascoa, J. (2020). “Numerical Analysis of a Cycloidal Rotor under Diverse Operating Conditions and Altitudes,” SAE International Journal Advances & Current Practice in Mobility<\/em>, 2(2):792-802. [DOI Link]<\/a>
  88. Teixeira, O., & Pascoa, J. (2020). “Hypersonic Flow Simulation towards Space Propulsion Geometries,” SAE International Journal Advances & Current Practice in Mobility<\/em>, 2(2):803-810. [DOI Link]<\/a>
  89. Trancossi, M., & Pascoa, J. (2019). “Diffusive Bejan number and second law of thermodynamics toward a new dimensionless formulation of fluid dynamics laws”, Thermal Science<\/em>, 23 (6) Part B, 4005-4022. [DOI Link]<\/a>
  90. Pendar, M.-R., & P\u00e1scoa, J.C. (2019). “Numerical modeling of electrostatic spray painting transfer processes in rotary bell cup for automotive painting”, International Journal of Heat and Fluid Flow<\/em>, 80, 108499. [DOI Link]<\/a>
  91. Trancossi, M., & Pascoa, J. (2019). “The influence of convective exchanges on coand\u00e3 effect”, INCAS Bulletin<\/em>, 11(4), pp. 191-202. [DOI Link]<\/a>
  92. Habibnia, M., & Pascoa, J. (2019). “ANN assisted flow modeling and analysis for a cyclorotor in ground effect”, Aerospace Science and Technology<\/em>, Vol 95, pp. 1-13. [DOI Link]<\/a>
  93. Trancossi, M., & Pascoa, J. (2019). “Modeling fluid dynamics and aerodynamics by second law and Bejan number (Part 1 – theory)”, INCAS Bulletin<\/em>, 11(3), pp. 169-180. [DOI Link]<\/a>
  94. Rodrigues, F., Mushyam, A., Pascoa, J.C., & Trancossi, M. (2019). “A new plasma actuator configuration for improved efficiency: The stair shaped dielectric barrier discharge (SSDBD) actuator,” Journal of Physics D: Applied Physics<\/em>, DOI: 10.1088\/1361-6463\/ab2584. [DOI Link]<\/a>
  95. Mushyam, A., Rodrigues, F., & Pascoa, J.C. (2019). “A plasma-fluid model for EHD flow in DBD actuators and experimental validation,” International Journal for Numerical Methods in Fluids<\/em>, DOI: 10.1002\/fld.4714. [DOI Link]<\/a>
  96. Singh, K. and J. C. P\u00e1scoa (2019). “Numerical Modeling of Stall and Poststall Events of a Single Pitching Blade of a Cycloidal Rotor,” Journal of Fluids Engineering<\/em>, vol. 141, no. 1, pp. 011103. [DOI Link]<\/a>
  97. Abdollahzadeh, M., Sedighi, A. A., & Esmailpour, M. (2018). Stagnation point flow of nanofluids towards stretching sheet through a porous medium with heat generation. Journal of Nanofluids<\/em>, 7(1), 149-155. [DOI Link]<\/a>
  98. Abdollahzadeh, M., Sedighi, A. A., & Esmaeilpour, M. (2018). Boundary layer and heat transfer analysis in liquid film of nanofluid over an unsteady stretching sheet. Journal of Nanofluids<\/em>, 7(2), 371-377. [DOI Link]<\/a>
  99. Sangtabi, A. R., Ramiar, A., Ranjbar, A. A., Abdollahzadeh, M., & Kianifar, A. (2018). Influence of repetitive laser pulse energy depositions on supersonic flow over a sphere, cone and oblate spheroid. Aerospace Science and Technology<\/em>, 76, 72-81. [DOI Link]<\/a>
  100. Havaej, P., Kermani, M. J., Abdollahzadeh, M., Heidary, H., & Moradi, A. (2018). A numerical modeling study on the influence of catalyst loading distribution on the performance of Polymer Electrolyte Membrane Fuel Cell. International Journal of Hydrogen Energy<\/em>, 43(21), 10031-10047. [DOI Link]<\/a>
  101. A. Ghanbarian, M.J. Kermani, J. Scholta, & M. Abdollahzadeh (2018). Polymer electrolyte membrane fuel cell flow field design criteria \u2013 Application to parallel serpentine flow patterns. Energy Conversion and Management<\/em>, 166, 281-296. [DOI Link]<\/a>
  102. A. Moradi Bilondi, M. Abdollahzadeh, M.J. Kermani, H. Heidary, & P. Havaej (2018). Numerical study of anode side CO contamination effects on PEM fuel cell performance; and mitigation methods. Energy Conversion and Management<\/em>, 177, 519-534. [DOI Link]<\/a>
  103. Trancossi, M., Cannistraro, M., & Pascoa, J. (2018). “Can constructal law and exergy analysis produce a robust design method that couples with industry 4.0 paradigms? The case of a container house”, Mathematical Modelling of Engineering Problems<\/em>, 5(4), pp. 303-312. [DOI Link]<\/a>
  104. M. Trancossi, & J. C. P\u00e1scoa (2018). “A new dimensionless approach to general fluid dynamics problems that accounts both the first and the second law of thermodynamics, Mathematical Modelling of Engineering Problems<\/em>, 5(4), pp. 331-340. [DOI Link]<\/a>
  105. M. Trancossi, & J. C. P\u00e1scoa (2018). “Design of ventilated cross flow heat sinks, Modelling, Measurement and Control C<\/em>, 79(3), pp. 90-97. [DOI Link]<\/a>
  106. F. Rodrigues, JC P\u00e1scoa, & M. Trancossi (2018). “Experimental analysis of DBD plasma actuators thermal characteristics under external flow influence”, Journal of Heat Transfer<\/em>, ASME, Vol 140 (10), pp 20. [DOI Link]<\/a>
  107. M Abdollahzadeh, JC P\u00e1scoa, & P Oliveira (2018). “Comparison of DBD Plasma Actuators Flow Control Authority in Different Modes of Actuation”, Aerospace Science and Technology<\/em>, doi: pp 20. [DOI Link]<\/a>
  108. L Gagnon, M Morandini, G Quaranta, P Masarati, C Xisto, & J P\u00e1scoa (2018). “Aeroelastic Analysis of a Cycloidal Rotor Under Various Operating Conditions”, Journal of Aircraft<\/em>, AIAA. [DOI Link]<\/a>
  109. Zehtabiyan-Rezaie, N., Arefian, A., Kermani, M. J., Noughabi, A. K., & Abdollahzadeh, M. (2017). Effect of flow field with converging and diverging channels on proton exchange membrane fuel cell performance. Energy Conversion and Management<\/em>, 152, 31-44. [DOI Link]<\/a>
  110. F Rodrigues, J P\u00e1scoa, & M Trancossi (2017). “Heat Generation Mechanisms of DBD Plasma Actuators”, Experimental Thermal and Fluid Science<\/em>, 12. [DOI Link]<\/a>
  111. M Abdollahzadeh, M Esmaeilpour, R Vizinho, A Younesi, & J Pascoa (2017). “Assessment of RANS turbulence models for numerical study of laminar-turbulent transition in convection heat transfer”, International Journal of Heat and Mass Transfer<\/em>, 115. [DOI Link]<\/a>
  112. Trancossi, M., Pascoa, J., & Xisto, C. (2016). Temperature oscillations in the wall of a cooled multi pulsejet propeller for aeronautic propulsion (No. 2016-01-1998). SAE Technical Paper.[DOI Link]<\/a>
  113. Ramiar, A., Mahmoudi, A. H., Esmaili, Q., & Abdollahzadeh, M. (2016). Influence of cathode flow pulsation on performance of proton exchange membrane fuel cell with interdigitated gas distributors. Energy<\/em>, 94, 206-217. [DOI Link]<\/a>
  114. M. Abdollahzadeh, Jos\u00e9 P\u00e1scoa, & Paulo Jorge Oliveira (2016). “Implementation of the Classical Plasma-Fluid Model for Simulation of the Dielectric Barrier Discharge (DBD) Actuators in OpenFOAM”, Volume 128, Computers and Fluids<\/em>, pp. 77\u201390. [DOI Link]<\/a>
  115. Leger J. A., P\u00e1scoa J. C., & Xisto C. M., (2016). \u201cAerodynamic optimization of cyclorotors\u201d Aircraft Engineering and Aerospace Technology<\/em>, Vol. 88, No. 2, pp.232 – 245. [DOI Link]<\/a>
  116. Trancossi, M., Mohammedalamin, O., Pascoa, JC., & Rodrigues, F. (2016). \u201cThermodynamic Analysis and Preliminary Design of the Cooling System of a Pulsejet for Aeronautic Propulsion\u201d, International Journal of Heat and Technology<\/em>, Vol. 34, pp. 528-534. [DOI Link]<\/a>
  117. Trancossi, M., Pascoa, JC., & Xisto, CM. (2016). \u201cDesign of an Innovative Off Road Hybrid Vehicle by Energy Efficiency Criteria\u201d, International Journal of Heat and Technology<\/em>, Vol. 34, pp. 387-395. [DOI Link]<\/a>
  118. Xisto C. M., P\u00e1scoa J. C., & Trancossi M., (2016). \u201cGeometrical Parameters Influencing the Aerodynamic Efficiency of a Small-Scale Self-Pitch High-Solidity VAWT\u201d, Journal of Solar Energy Engineering<\/em>, Vol. 138, No. 3, pp. 8. [DOI Link]<\/a>
  119. Morgado, J., Vizinho R., Silvestre, M. A. R. and P\u00e1scoa, J. C. (2016). \u201cXFOIL vs CFD performance predictions for high lift low Reynolds number airfoils\u201d, Aerospace Science and Technology<\/em>, Vol. 52, pp. 207-214. [DOI Link]<\/a>
  120. Trancossi M., Stewart J., Dumas A., Madonia M., & Pascoa J. (2016). \u201cConstructal Design of an Entropic Wall With Circulating Water Inside\u201d, Journal of Heat Transfer<\/em>, Vol. 138 (8), pp. 9. [DOI Link]<\/a>
  121. Xisto C., Leger J., P\u00e1scoa J. et al. (2016). “Parametric Analysis of a Large-scale Cycloidal Rotor in Hovering Conditions”. ASCEs Journal of Aerospace Engineering<\/em>, DOI: 10.1061\/(ASCE)AS.1943-5525.0000658. [DOI Link]<\/a>
  122. Trancossi M, Madonia M., Dumas A., Angeli D., Bingham C., Das S., Grimaccia F., P\u00e1scoa, J. C. et al (2016). \u201cA new aircraft architecture based on the ACHEON Coanda effect nozzle: flight model and energy evaluation\u201d, European Transport Research Review<\/em>, Vol. 8, pp. 1-21. [DOI Link]<\/a>
  123. Morgado, J., Silvestre, M. A. R. and P\u00e1scoa, J. C. (2016). \u201cA Comparison of Post-Stall Models Extended for Propeller Performance Prediction\u201d, Aircraft Engineering and Aerospace Technology<\/em>, Vol. 88, No. 4, pp. 12. [DOI Link]<\/a>
  124. Shyam S. Das, Jose C. P\u00e1scoa, M. Trancossi, & A. Dumas (2016). \u201cComputational Fluid Dynamic Study on a Novel Propulsive System: ACHEON and Its Integration with an Unmanned Aerial Vehicle (UAV)\u201d, ASCEs Journal of Aerospace Engineering<\/em>, Vol. 29, No. 1, 04015015. [DOI Link]<\/a>
  125. A Baptista, F Santos, J P\u00e1scoa, & N S\u00e4ndig (2016). \u201cProject Management Methodologies as Main Tool for Current Challenges in Global Economy Driving Historical Changes\u201d, Journal of Advanced Management Science<\/em>, Vol 4 (2) pp. 1-7.[DOI Link]<\/a>
  126. Abdollahzadeh, M., & Esmaeilpour, M. (2015). Enhancement of phase change material (PCM) based latent heat storage system with nano fluid and wavy surface. International Journal of Heat and Mass Transfer<\/em>, 80, 376-385. [DOI Link]<\/a>
  127. Vizinho, R., P\u00e1scoa, J., & Silvestre, M. (2015). \u201cTurbulent transition modeling through mechanical considerations\u201d, Applied Mathematics and Computation<\/em>, Vol 269, pp. 308-325. [DOI Link]<\/a>
  128. Vizinho, R., Morgado, J., P\u00e1scoa, J., & Silvestre, M. (2015). \u201cAnalysis of transitional flow in 3D geometries using a novel phenomenological model\u201d, Aerospace Science and Technology<\/em>, Vol. 45, pp. 431-441. [DOI Link]<\/a>
  129. Baptistaa, AA, Charrua-Santos, F, & P\u00e1scoa, JC (2015). \u201cPrevention and Risk Management in RTD European Projects Developed by University-Company’s Consortiums\u201d, Procedia Computer Science<\/em>, Vol. 64, pp. 403-408. [DOI Link]<\/a>
  130. Morgado, J., Abdollahzadeh, M., Silvestre, M.A.R., & P\u00e1scoa, J.C (2015). \u201cHigh altitude propeller design and analysis\u201d, Aerospace Science and Technology<\/em>, Vol. 45, pp. 398-407. [DOI Link]<\/a>
  131. Xisto, C.M., P\u00e1scoa, J.C., & Oliveira, P.J (2015). \u201cNumerical analysis of real gas MHD flow on two-dimensional self-field MPD thrusters\u201d, Acta Astronautica<\/em>, Vol. 112, pp. 89-101. [DOI Link]<\/a>
  132. Silvestre, M.A.R., Morgado, J., Alves, P., Santos, P., Gamboa, P., & P\u00e1scoa, J.C. (2015). \u201cPropeller performance measurements at low Reynolds numbers\u201d, International Journal of Mechanics<\/em>, Vol 9, pp. 154-166.
  133. Ilieva, G., P\u00e1scoa, J., Dumas, A., & Trancossi, M. (2015). Unsteady interaction effects between an airship and its air-jet propulsion system, Advanced Structured Materials<\/em>, Vol. 44, pp. 127-143.
  134. Leger J. A., P\u00e1scoa J. C., & Xisto C. M., (2015). “Analytical Modeling of a Cyclorotor in Hovering State”, Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering<\/em>, Vol. 229, No. 12, pp. 2163-2177. [DOI Link]<\/a>
  135. M. Abdollahzadeh, Jos\u00e9 P\u00e1scoa, Paulo Jorge Oliveira, & F. Rodrigues (2015). “Numerical Design and Analysis of a Multi-DBD Actuator Configuration for the Experimental Testing of ACHEON Nozzle Model”, Aerospace Science and Technology<\/em>, Vol. 41, pp. 259\u2013273. [DOI Link]<\/a>
  136. J. Morgado, M. A R. Silvestre, & J. C. P\u00e1scoa (2015). “Validation of new formulations for propeller analysis”, AIAA Journal of Propulsion and Power<\/em>, Vol. 31 (1), pp. 467-477. [DOI Link]<\/a>
  137. AAR Baptista, MJM Silva, CM Cabrita, FB Santos, & JC Pascoa (2014). \u201cTechnology Transfer as a Driver of Cooperation and Communication in a New Knowledge Management Methodology\u201d, Lecture Notes on Information Theory<\/em>, Vol 2 (3), pp. 259-265.[DOI Link]<\/a>
  138. Xisto, C.M., P\u00e1scoa, J.C., & Oliveira, P.J. (2014). “A pressure-based high resolution numerical method for resistive MHD”, Journal of Computational Physics<\/em>, 275, pp. 323-345. [DOI Link]<\/a>
  139. Das, S., Abdollahzadeh, M., Pascoa, J., Dumas, A., & Trancossi, M. (2014). “Numerical modeling of coanda effect in a novel propulsive system”, International Journal of Multiphysics<\/em>, 8 (2), pp. 181-201. [DOI Link]<\/a>
  140. M Trancossi, A Dumas, SS Das, & J Pascoa (2014). \u201cDesign methods of Coanda effect nozzle with two streams\u201d, INCAS Bulletin<\/em>, Vol. 6 (1), pp. 83-95.[DOI Link]<\/a>
  141. A Dumas, M Subhash, M Trancossi, & J P\u00e1scoa Marques (2014). \u201cThe Influence of Surface Temperature on Coanda Effect\u201d, Energy Procedia<\/em>, Vol. 45, pp. 626-634. [DOI Link]<\/a>
  142. Abdollahzadeh, M., Pascoa, J.C., Ranjbar, A.A., & Esmaili, Q. (2014). “Analysis of PEM (Polymer Electrolyte Membrane) fuel cell cathode two-dimensional modeling”, Energy<\/em>, Vol. 68, pp. 478-494. [DOI Link]<\/a>
  143. Abdollahzadeh, M., P\u00e1scoa, J.C., & Oliveira, P.J. (2014). “Two-dimensional numerical modeling of interaction of micro-shock wave generated by nanosecond plasma actuators and transonic flow”, Journal of Computational and Applied Mathematics<\/em>, Vol. 270, pp. 401-416. [DOI Link]<\/a>
  144. Abdollahzadeh, M., P\u00e1scoa, J.C., & Oliveira, P.J. (2014). “Modified split-potential model for modeling the effect of DBD plasma actuators in high altitude flow control”, Current Applied Physics<\/em>, Vol. 14 (8), pp. 1160-1170. [DOI Link]<\/a>
  145. Ilieva, G., P\u00e1scoa, J., Dumas, A., & Trancossi, M. (2014). “MAAT – Promising innovative design and green propulsive concept for future airship’s transport”, Aerospace Science and Technology<\/em>, Vol. 35 (1), pp. 1-14. [DOI Link]<\/a>
  146. P\u00e1scoa, J. C., Dumas, A., Trancossi, M., Stewart, P., & Vucinic, D. (2013). A review of thrust-vectoring in support of a V\/STOL non-moving mechanical propulsion system. Central European Journal of Engineering, 3(3), 374-388.[DOI Link]<\/a>
  147. Vizinho, R., Pascoa, J., and Silvestre, M., (2013). “High Altitude Transitional Flow Computation for a Propulsion System Nacelle of MAAT Airship,” SAE International Journal Aerospace<\/em>, Vol. 6, No. 2, pp.714-720. [DOI Link]<\/a>
  148. Esmaili, Q., Ranjbar, A. A., & Abdollahzadeh, M. (2013). Numerical simulation of a direct methanol fuel cell through a 1D+ 1D approach. International Journal of Green Energy<\/em>, 10(2), 190-204. [DOI Link]<\/a>
  149. Xisto C.M., P\u00e1scoa J. C. , Oliveira P.J. (2013). “A pressure-based method with AUSM-type fluxes for MHD flows at arbitrary Mach numbers”, International Journal for Numerical Methods in Fluids<\/em>, Vol. 72, No. 11, pp. 1165\u20131182. [DOI Link]<\/a>
  150. Trancossi M., Dumas A., Madonia M., P\u00e1scoa J., Vucinic D. (2012). \u201cFire-safe airship system design\u201d, SAE International Journal of Aerospace<\/em>, Vol. 5, No. 1: pp. 11-21. [DOI Link]<\/a>
  151. P\u00e1scoa J. C., Mendes N. M., Br\u00f3jo F. M., Santos F. S., Fael P. O. (2012). “An innovative experimental on-road testing method and its demonstration on a prototype vehicle”, Journal of Mechanical Science and Technology<\/em>, Vol. 26, No. 6, pp 1663-1670. [DOI Link]<\/a>
  152. P\u00e1scoa J. C., Silva F. J., Pinheiro J. S., Martins D. J. (2012). “A new approach for predicting PAT-pumps operating point from direct pumping mode characteristics”, Journal of Scientific & Industrial Research<\/em>, Vol. 71, pp. 144-148.
  153. Ilieva G., P\u00e1scoa J.C., Dumas A., Trancossi M. (2012). \u201cA critical review of propulsion concepts for modern airships\u201d, Central European Journal of Engineering<\/em>, Vol. 2, No. 2, pp 189-200. [DOI Link]<\/a>
  154. Xisto C.M., P\u00e1scoa J. C. , Oliveira P.J., Nicolini D.A. (2011). “An hybrid pressure-density based algorithm for the Euler equations at all Mach number regimes”, International Journal for Numerical Methods in Fluids<\/em>, Vol. 70, No. 8, pp. 961\u2013976. [DOI Link]<\/a>
  155. P\u00e1scoa J. C. (2011). “Benchmark test cases for CFD in mechanical engineering”, Central European Journal of Engineering<\/em>, Vol 1(4), pp. 333. (Editorial). [DOI Link]<\/a>
  156. P\u00e1scoa J. C., Silva F. J., Pinheiro J. S., Martins D. J. (2010). “Accuracy details in realistic CFD modeling of an industrial centrifugal pump in direct and reverse modes”, Journal of Thermal Science<\/em>, Vol. 19, No. 6, pp. 491-499. [DOI Link]<\/a>
  157. P\u00e1scoa J. C., Xisto C. M., G\u00f6ttlich E. (2010). “Performance assessment limits in transonic 3D turbine stage blade rows using a mixing-plane approach”, Journal of Mechanical Science and Technology<\/em>, Vol. 24, No. 10, pp. 2035-2042. [DOI Link]<\/a>
  158. P\u00e1scoa J. C., Mendes A. C., Gato L.M.C. (2009). “A fast iterative inverse method for turbomachinery blade design”, Mechanics Research Communications<\/em>, Vol. 36, No. 5, pp. 537-546. [DOI Link]<\/a>
  159. P\u00e1scoa J. C., Luff J. K., McGuirk J. J., & Mendes A. C., (2006). \u201cOn Accurate Numerical Modeling of 3D Turbulent Flow Through a DCA Compressor Cascade and its Experimental Validation\u201d, International Journal of Dynamics of Fluids<\/em>, Vol. 2(1), pp. 1\u201318.<\/li>\n \n
  160. P\u00e1scoa J. C., Mendes A. C., Gato L.M.C., & Elder R., (2004). \u201cAerodynamic Design of Turbomachinery Cascades Using an Enhanced Time-marching Finite Volume Method\u201d, Journal of Computer Modeling in Engineering & Sciences<\/em>, Vol. 6(6), pp. 537\u2013546.<\/li>\n \n
  161. P\u00e1scoa J. C., Mendes A. C., & Gato L. C., (2004). \u201cAn Inverse Method for Turbomachinery Cascades of Blades \u2013 Investigation of the existence and uniqueness of solution\u201d, WIT Transactions on Engineering Sciences<\/em>, Vol. 40, pp. 312-322.<\/li>\n \n
  162. P\u00e1scoa J. C., Mendes A. C., & Gato L. C., (2002). \u201cAn Efficient Finite Volume Scheme with Improved Artificial Viscosity Suitable for Transonic flow Calculations\u201d, WIT Transactions on Engineering Sciences<\/em>, Vol. 32, pp. 505-514.<\/li>\n \n
  163. Mendes A. C., P\u00e1scoa J. C., & Kolodziej J. A., (1998). \u201cAn Alternative Approach to Integral Equation Method Based on Trefftz Solution for Inviscid Incompressible Flow\u201d, WIT Transactions on Engineering Sciences<\/em>, Vol. 18, pp. 57-68.<\/li>\n\n <\/ol>\n\n<\/div>\n\n\n\n\n