Proceedings of International Conferences

Index of papers and global symposia presentations delivered by ClusterDEM researchers.

📊 Conference Output Analytics

0 Total Papers

Annual Production Breakdown

20260
20250
20240
20230
20220
20210
20200
2011 – 20190
< 20110
  1. Gomes, D., Santo, A. E., & Páscoa, J. (2026, May). Pressure Field Reconstruction in Turbulent Flows Using Integral Measurement-Based Physics Informed Neural Networks (PINNs). In 2026 IEEE International Symposium on Artificial Intelligence for Instrumentation and Measurement (AI4IM) (pp. 1-6). IEEE.[DOI Link]
  2. F Rodrigues, K Shvydyuk, A Benmoussa, M Abdollahzadehsangroudi(2026, June). Experimental Evaluation of Micro-Stairs Plasma Actuator Configuration for Performance Enhancement. In Proceedings of the 13th International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT 2026), June, 2026 | Barcelona, Spain[DOI Link]
  3. F Bagherighajari, JC Páscoa Marques, M Abdollahzadehsangroudi(2026, June). Comparative Analysis of Thermal, Chemical, and Aerodynamic Pathways in DBD Plasma-Assisted Bluff-Body Flames. In Proceedings of the 13th International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT 2026), June, 2026 | Barcelona, Spain[DOI Link]
  4. K Pastro, A Benmoussa, R Awazu, M Abdollahzadehsangroudi(2026, June). Numerical Analysis of Tesla Turbine Performance with Circumferential Non-Uniform Casing Clearance. In Proceedings of the 13th International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT 2026), June, 2026 | Barcelona, Spain[DOI Link]
  5. A Benmoussa, K Pastro, R Awazu, M Abdollahzadehsangroudi(2026, June). Numerical Analysis of a Hybrid Turbine: Performance Comparison Between Bladed and Grooved Disc Design. In Proceedings of the 13th International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT 2026), June, 2026 | Barcelona, Spain, paper No. 193[DOI Link]
  6. Moreira, M., Nunes, G., Rodrigues, F., & Páscoa, J. (2025, July). Electrospray Optimization Using Dielectric Barrier Discharge Plasma Actuators Through a Conical Nozzle. In Fluids Engineering Division Summer Meeting (Vol. 88995, p. V001T05A004). American Society of Mechanical Engineers.[DOI Link]
  7. Nunes, G., Moreira, M., Rodrigues, F., & Páscoa, J. (2025, July). Experimental Analysis of Electrohydrodynamic Atomization of Different Fluids. In Fluids Engineering Division Summer Meeting (Vol. 88995, p. V001T05A009). American Society of Mechanical Engineers.[DOI Link]
  8. Gomes, D. E., Santo, A. E., & Páscoa, J. (2025, October). Enhancing PINN-Based Flow Reconstruction with Sparse and Decoupled Gradient-Weighted Sensor Placement. In IECON 2025–51st Annual Conference of the IEEE Industrial Electronics Society (pp. 1-6). IEEE.[DOI Link]
  9. Benmoussa, A., Pendar, M. R., & Páscoa, J. C. (2025, August). Numerical Analysis of Pulsed Electric Field Effects on Droplet Dynamics in Electrostatic Rotary Bell Spraying (Paper No. HTFF 251). In 11th World Congress on Mechanical, Chemical, and Material Engineering (MCM’25), Paris, France. [DOI Link]
  10. Shvydyuk, K. O., Mbanguine, L. A., Páscoa, J. C., & Rodrigues, F. F. (2025, November). Lifetime Evaluation of Surface Dielectric Barrier Discharge Plasma Actuators for Green Combustion Application. In ASME International Mechanical Engineering Congress and Exposition (Vol. 89381, p. V007T11A038). American Society of Mechanical Engineers.[DOI Link]
  11. Mbanguine, L., Rodrigues, F., Abdollahzadehsangroudi, M., Pires, L., & Páscoa, J. (2025, November). Proof of Concept for Ice Detection Using Electroactive Polymer Dielectric Barrier Discharge Plasma Actuators. In ASME International Mechanical Engineering Congress and Exposition (Vol. 89343, p. V003T06A001). American Society of Mechanical Engineers.[DOI Link]
  12. Esmaeilpour, M., & Abdollahzadehsangroudi, M. (2025, November). Computational Insights into DBD Plasma’s Influence on Vortex Ring Dynamics. In Division of Fluid Dynamics Annual Meeting 2025.[Link]
  13. F. Bagherighajari, J.C. Pascoa, M. Abdollahzadehsangroudi (2025, April). Computational Analysis of Non-Reacting Flow in a Non-Premixed Burner Featuring a Plasma-Enhanced Bluff-Body Swirler. Proceedings of the 10th World Congress on Momentum, Heat and Mass Transfer (MHMT 2025) Barcelona, Spain – April, 2025 Paper No. CSP 129.[DOI Link]
  14. E. Zardini, F. Bagherighajari, J.C. Pascoa, M. Abdollahzadehsangroudi (2025, April). Numerical Analysis of Flow Channel Expansion and Contraction Effects on Polymer Electrolyte Membrane Fuel Cell Performance. Proceedings of the 10th World Congress on Momentum, Heat and Mass Transfer (MHMT 2025) Barcelona, Spain – April, 2025 Paper No. ENFHT 178. [DOI Link]
  15. Shvydyuk, K. O., Freire Rodrigues, F. M., & Pereira Silva, A. (2025, November). Investigation of the Dielectric Barrier Discharge Plasma Actuators Degradation in High Temperature Environments. In ASME International Mechanical Engineering Congress and Exposition (Vol. 89343, p. V003T06A004). American Society of Mechanical Engineers.[DOI Link]
  16. Benmoussa, A., Chekifi, T., Shvydyuk, K., Tarulescu, R., Bayod-Rújula, A., Ilin, C., & Rodrigues, F. (2025, November). Dielectric Barrier Discharge Plasma-Based Flow Control for a Cycloidal Wind Turbine Pitching Blade Under Dynamic Stall. In ASME International Mechanical Engineering Congress and Exposition (Vol. 89381, p. V007T11A039). American Society of Mechanical Engineers.[DOI Link]
  17. Chekifi, T., Benmoussa, A., Khelifi, R., & Boukraa, M. (2025). Thermo-Hydraulic Performance Evaluation: Comparing Three Heat Transfer Fluids for Curved Tube Receivers. In Technological and Innovative Progress in Renewable Energy Systems: Proceedings of the 2024 International Renewable Energy Days (IREN Days’ 2024) (pp. 139-142). Cham: Springer Nature Switzerland.[DOI Link]
  18. Gomes, D., Espírito Santo, A., & Páscoa, J. C. (2024, November). Theoretical Framework and Use of CNN Reconstruction With Optimal Sparse Sensor Placement in a Flow Field. In ASME International Mechanical Engineering Congress and Exposition (Vol. 88667, p. V008T10A007). American Society of Mechanical Engineers.
  19. Gomes, D. E., Santo, A. E., & Páscoa, J. (2024, November). Artificial Neural Network SoftSensor for Water Distribution Networks. In IECON 2024-50th Annual Conference of the IEEE Industrial Electronics Society (pp. 1-6). IEEE.
  20. Bagherighajari, F., Pascoa, J. C., & Abdollahzadehsangroudi, M. (2024, November). Ring plasma actuators for controlling the methane/air flame in a non-premixed bluff body burner. Paper presented at the International Congress on Engineering (ICEUBI 2024) – Sustainability and Resilience: Innovation and Solutions, Covilhã, Portugal.
  21. L. Mbanguine, F. Rodrigues, J.C. Páscoa, “Development of New Plasma actuators based on flexible materials electrostatically activated for Flow control and Ice mitigation”, International Congress on Engineering – ICEUBI 2024, 27-29 Novembro, Covilhã, Portugal.
  22. G. Nunes, M. Moreira, F. Rodrigues, J.C. Páscoa, “Experimental Analysis of Electrohydrodynamic Jets based on the Phase Doppler Technique”, International Congress on Engineering – ICEUBI 2024, 27-29 Novembro, Covilhã, Portugal.
  23. M. Moreira, G. Nunes, F. Rodrigues, J.C. Páscoa, “Optimization of Electrospray Performance using Dielectric Barrier Discharge Plasma Actuators: An Experimental Study on different operation modes”, International Congress on Engineering – ICEUBI 2024, 27-29 Novembro, Covilhã, Portugal.
  24. Bagherighajari, F., Pascoa, J., & Abdollahzadehsangroudi, M. (2024, June). Flow manipulation strategies: Detached Eddy Simulation study of DBD plasma actuators in a bluff body burner. In ECCOMAS 2024. [DOI Link]
  25. Dolati, F., Hasani, F., Pascoa, J. C., & Abdollahzadeh, M. (2024, June). A novel EHD-jet system to achieve high performance in terms of energy consumption and heat transfer. In ECCOMAS 2024. [DOI Link]
  26. Modanloujoubari, M., Dolati, F., Abdollahzadeh, M., Deylami, H., Pascoa, J. C., & Rodrigues, F. (2024, June). Numerical simulation of vectoring of arc plasma jet using Coanda effect. In ECCOMAS 2024. [DOI Link]
  27. Benmoussa, A., Pendar, M., & Pascoa, J. (2024). Numerical investigation of electrostatic coating using Nitrotherm spray technique. In ECCOMAS 2024 – 9th European Congress on Computational Methods in Applied Sciences and Engineering. [DOI Link]
  28. Benmoussa, A., & Gamboa, P. V. (2024). Flight Simulation of a Hybrid Electric Propulsion VTOL UAV for Mission Performance Assessment. Advances in Science and Technology, 144, 81-91. [DOI Link]
  29. Rodrigues, F., Lopes, R., Francisco, M., Páscoa, J., & Abdollahzadehsangroudi, M. (2024, July). Numerical Investigation of Blocked Microchannel Heat Sink Configurations With Porous Fins. In Fluids Engineering Division Summer Meeting.
  30. Moreira, Miguel & Rodrigues, Frederico & Páscoa, José. (2024). Developments in Taylor Cone Formation: Operation and Testing of Different Liquids. [DOI Link]
  31. Rodrigues, F., Mbanguine, L., & Páscoa, J. (2024, July). Experimental Investigation of New Electro-Active Polymers-Based Plasma Actuators for Flow Control and Ice Mitigation Applications. In Fluids Engineering Division Summer Meeting.
  32. Bagherighajari, F., Pascoa, J., & Abdollahzadehsangroudi, M. (2023). Flame stabilization and control using dielectric barrier discharge plasma actuators. Paper presented at the 4th ECATS Conference, Delft, Netherlands.
  33. Nunes-Pereira, J., Rodrigues, F., Abdollahzadehsangroudi, M., Pina dos Santos, P. S., Silva, M., Pereira Silva, A., … & Lanceros-Mendez, S. Dielectric barrier discharge plasma actuators based on thermosetting composites for flow control in wind turbines blades. In Materiais 2023.
  34. Cândido, S., & Páscoa, J. C. (2023, October). A Three-Dimensional Numerical Investigation of Taylor Cone Jets Instabilities Using VOF Method. In ASME International Mechanical Engineering Congress.
  35. Candido, S., Pendar, M. R., & Páscoa, J. C. (2023, October). Improving efficiency of automotive coating and curing processes through deep learning algorithms. In ASME International Mechanical Engineering Congress.
  36. Pendar, M. R., & Páscoa, J. C. (2022). Numerical Analysis of Automotive Electrostatic Coating Process: Applying Nitrothermspray Technique. In Congress on Numerical Methods in Engineering CMN 2022 (pp. 443-443).
  37. Cândido, S., & Páscoa, J. C. (2022, October). Numerical Analysis of Interfacial Electrohydrodynamic Flow With Modal Decomposition. In ASME International Mechanical Engineering Congress.
  38. Pendar, M. R., Páscoa, J. C., & Lima, R. (2022, August). Numerical investigation of automotive paint oven for improving the thermal efficiency. In Fluids Engineering Division Summer Meeting.
  39. Pendar, M. R., & Páscoa, J. C. (2022, August). Electrostatic painting process: Impact of using connected high-voltage embodiments. In Fluids Engineering Division Summer Meeting.
  40. Abdollahzadehsangroudi, M., Rodrigues, F., Bagherighajari, F., Nunes-Pereira, J., Pascoa, J. C., & Dolati, F. (2022). Enhanced surface cooling with dielectric barrier discharge plasma actuators. Paper presented at the ICEUBI22, Covilhã, Portugal.
  41. Rodrigues, F., Abdollahzadeh, M., Nunes-Pereira, J., & Pascoa, J. (2022). Plasma actuators as novel means for icing control and aerodynamic enhancement. Paper presented at the ICEUBI22, Covilhã, Portugal.
  42. Rodrigues, F., Abdollahzadeh, M., Bagherighajari, F., & Páscoa, J. (2022, August). Numerical Simulation of Anti-Icing Effect With Dielectric Barrier Discharge Plasma Actuators on a Surface of an Airfoil. In Fluids Engineering Division Summer Meeting.
  43. Pendar, M. R., & Pascoa, J. (2021). Study of the plasma actuator effect on the flow characteristics of an airfoil: An LES investigation. SAE International Journal of Advances and Current Practices in Mobility, 3(2021-01-0016), 1206-1215.[DOI Link]
  44. Pendar, M. R., Páscoa, J., & Roohi, E. (2021). A Numerical Study of Unsteady Hydrodynamic Characteristics on hydrofoils with leading edge protuberances. In 11th International Symposium on Cavitation CAV2021.
  45. Pendar, M. R., & Pascoa, J. (2021). Numerical Simulation of the Electrostatic Coating Process: the Effect of Applied Voltage, Droplet Charge and Size. SAE International Journal of Mobility.
  46. Michele, T., & Pascoa, J. (2021, November). Fluence As an Instrument Towards a Unified Representation of Fluiddynamic Related Phenomena. In ASME International Congress.
  47. Cândido, S., & Páscoa, J. C. (2021, November). Numerical simulation of electrified liquid jets using a geometrical VoF method. In ASME International Congress.
  48. Trancossi, M., & Jose, P. (2021, November). Irreversibility Analysis, Design, and Optimization of a Combined Hybrid Hot Air and Buoyant Gas Balloon. In ASME International Congress.
  49. Rodrigues, F. F., Moreira, M., & Pascoa, J. (2021, August). Analysis and implementation of dielectric barrier discharge plasma actuators for ground vehicles wake reduction. In Fluids Engineering Division Summer Meeting.
  50. Rodrigues, F. F., Nunes-Pereira, J., Abdollahzadeh, M., Pascoa, J., & Lanceros-Mendez, S. (2021, August). Comparative evaluation of dielectric materials for plasma actuators. In Fluids Engineering Summer Meeting.
  51. Rodrigues, F. F., Abdollahzadeh, M., Pascoa, J., & Pires, L. (2021, August). Influence of exposed electrode thickness on plasma actuators performance. In Fluids Engineering Summer Meeting.
  52. Pendar, M. R., Páscoa, J., & Roohi, E. (2021, May). Cavitating flow structure and noise suppression analysis of a hydrofoil with wavy leading edges. In 11th International Symposium on Cavitation CAV2021.
  53. Dias, F., Xisto, C., & Páscoa, J. (2020). Study on the Manipulation of Plasma Density around a Cubesat Using Magnetohydrodynamics. KnE Engineering, 405-414.[DOI Link]
  54. Moreira, M. A. B., Rodrigues, F. M. F., & Marques, J. C. P. (2020). Experimental study of dielectric barrier discharge plasma actuators for active flow control. KnE Engineering, 487-499.[DOI Link]
  55. Cândido, S., & Páscoa, J. (2020). 3D Unsteady RANS Computation of the Mixing on a T-junction. KnE Engineering, 539-546.[DOI Link]
  56. Canilho, H., Fael, C., & Páscoa, J. (2020). A numerical study of the effect of vortex-induced vibrations on a circular cylinder mounted under elastic support. KnE Engineering, 100-112.[DOI Link]
  57. Cândido, S., & Páscoa, J. C. (2020, November). Numerical analysis on the stability conditions of an electrohydrodynamic jet. In ASME International Mechanical Engineering Congress.
  58. Rodrigues, F. F., Abdollahzadeh, M., & Pascoa, J. (2020, July). Dielectric barrier discharge plasma actuators for active flow control. In Fluids Engineering Division Summer Meeting.
  59. Rodrigues, F. F., Habibnia, M., & Pascoa, J. (2020, July). Novel propulsion system for VTOL aircraft based on cycloidal rotors coupled with wings. In Fluids Engineering Division Summer Meeting.
  60. Habibnia, M., Rodrigues, F., & Páscoa, J. (2020). A novel propulsion system based on cycloidal rotors coupled with pair-wing for VTOL aircrafts; cyclo-craft. Progress in Canadian Mechanical Engineering, 3.
  61. Pendar, M. R., & Páscoa, J. C. (2020). Study of droplet characteristics and spray deposition during coating produced by an electrostatic rotary bell sprayer on OpenFoam. Mechanical Engineering, 3.
  62. Cândido, S., Páscoa Marques, J., Tomé, A., Amorim, A., & Weber, S. K. (2019, November). CFD Analysis of Flow Structures in a Mixing Chamber. In ASME International Mechanical Engineering Congress.
  63. Rodrigues, F. F., Pascoa Marques, J., & Trancossi, M. (2019, November). Plasma actuators optimization using stair shaped dielectric layers. In ASME International Mechanical Engineering Congress.
  64. Dias, F. A., Xisto, C., & Páscoa, J. (2019). Analysis and Comparison of Different Chemistry Models for the Computation of Reacting Flows on Re-entry and Hypersonic Vehicles. In AIAA Propulsion Forum 2019.
  65. Trancossi, M., Pascoa, J., & Cannistraro, G. (2018, October). Safety Analysis of an Airship Which Loses Lifting Gas from the Hull. In Aerospace Systems and Technology Conference. SAE Technical Paper.[DOI Link]
  66. TTrancossi, M., & Pascoa, J. (2018). Energetic, environmental and range estimation of hybrid and all-electric transformation of an existing light utility commuter aircraft (No. 2018-01-1933). SAE Technical Paper.[DOI Link]
  67. Silva, A. R., Santos, F., Espirito-Santo, A., Marques, J. P., & Fael, C. (2018, July). Study of a water-energy integrated system: challenges of prototyping. In 2018 Energy and Sustainability for Small Developing Economies (ES2DE) (pp. 1-6). IEEE.[DOI Link]
  68. Monteiro, J. A. L., & Páscoa, J. (2018, November). Effects of harmonic vibration on cycloidal rotor performance. In ASME international mechanical engineering congress.
  69. Pascoa, J. C., Teixeira, O., & Filipe, G. (2018, November). A review of propulsion systems for cubesats. In ASME international mechanical engineering congress.
  70. Dias, F., Páscoa, J., & Xisto, C. (2018, November). Numerical analysis of a multi-species MHD model for plasma layer control of re-entry vehicles. In ASME International Mechanical Engineering Congress.
  71. Rodrigues, F. F., Pascoa, J. C., & Trancossi, M. (2018, November). Experimental analysis of alternative dielectric materials for DBD plasma actuators. In ASME International Mechanical Engineering Congress.
  72. Silva, A. R., Santos, F., Espírito-Santo, A., Marques, J. P., & Fael, C. S. (2018, July). Development of the concept vs prototyping. In 2018 IEEE 16th International Conference on Industrial Informatics (INDIN).
  73. Pascoa, J. C., Candido, S., Charrua-Santos, F., Espirito-Santo, A., & Canario, M. (2018, November). Disc turbine for energy harvesting. In ASME International Mechanical Engineering Congress.
  74. Monteiro, J. B., Azevedo, A., Pardal, G., Guerman, A., Páscoa, J., Dias, F., … & Figueiredo, P. (2018). MECSE: A CubeSat mission aiming to measure and manipulate the ionospheric plasma layer. In 4th IAA Conference on CubeSat Workshop.
  75. Trancossi, M., Hussain, M., Shivesh, S., & Pascoa, J. (2017). A new VTOL propelled wing for flying cars: critical bibliographic analysis (No. 2017-01-2144). SAE Technical Paper.[DOI Link]
  76. Bandycki, S., Trancossi, M., & Pascoa, J. (2017). Control, Propulsion and Energy Assessment of a Spherical UAS for Low Speed Operations (No. 2017-01-2065). SAE Technical Paper.[DOI Link]
  77. Rodrigues, F. F., Pascoa, J. C., & Trancossi, M. (2017, November). Experimental thermal characterization of DBD plasma actuators. In ASME International Mechanical Engineering Congress.
  78. Espírito-Santo, A., Serra, P., Albuquerque, S., Ribeiro, B., Santos, F., & Páscoa, J. (2017, September). Low-power smart sensing in energy and water systems. In 2017 IEEE International Workshop on Measurement and Networking.
  79. Martins, H., Pascoa, J., Espírito-Santo, A., & Santos, F. (2017, May 12). PATs preliminary study to operate in Alexandre Aibeo pipeline. Paper presented at the ICEUBI 2017, Covilhã, Portugal.
  80. Dias, F., Pascoa, J., & Xisto, C. (2017, May 12). A multi-species real gas model for the simulation of plasma flow in reentry vehicles. Paper presented at the ICEUBI 2017, Covilhã, Portugal.
  81. Rodrigues, F., Pascoa, J., & Trancossi, M. (2017, May 12). Experimental characterization of dielectric barrier discharge plasma actuators. Paper presented at the ICEUBI 2017, Covilhã, Portugal.
  82. Silva, A., Santos, F., Espírito-Santo, A., Pascoa, J., & Fael, C. (2017, May 12). Water-energy nexus: Review of literature in management of integrated systems. Paper presented at the ICEUBI 2017, Covilhã, Portugal.
  83. Tomé, G., Rodrigues, F., & Pascoa, J. (2017, May 12). Optical methods for flow visualization, preliminary design set-up and test of a schlieren system. Paper presented at the ICEUBI 2017, Covilhã, Portugal.
  84. Trancossi, M., & Pascoa, J. C. (2016, November). Optimized modular design for energy efficiency: The case of an innovative electric hybrid vehicle design. In ASME International Mechanical Engineering Congress and Exposition (Vol. 50664, p. V012T16A023). American Society of Mechanical Engineers.[DOI Link]
  85. Trancossi, M., Stewart, J., & Pascoa, J. C. (2016, November). A New propelled wing aircraft configuration. In ASME International Mechanical Engineering Congress and Exposition (Vol. 50510, p. V001T03A048). American Society of Mechanical Engineers.[DOI Link]
  86. Rodrigues, F. F., Pascoa, J. C., & Trancossi, M. (2016, November). Analysis of innovative plasma actuator geometries for boundary layer control. In ASME International Mechanical Engineering Congress and Exposition (Vol. 50510, p. V001T03A007). American Society of Mechanical Engineers.[DOI Link]
  87. Dias, F., Páscoa, J., & Xisto, C. (2016, November). Numerical computations of MHD flow on hypersonic and re-entry vehicles. In ASME International Mechanical Engineering Congress and Exposition (Vol. 50510, p. V001T03A005). American Society of Mechanical Engineers.[DOI Link]
  88. Xisto C., Pascoa J.C., Trancossi M., (2015) “Numerical analysis of design parameters with strong influence on the aerodynamic efficiency of a small-scale self-pitch VAWT”, ASME International Mechanical Engineering Congress.
  89. Rodrigues F., Pascoa J.C., Dias F., Abdollahzadeh M., (2015) “Plasma Actuators for Boundary Layer Control of Next Generation Nozzles”, ASME International Mechanical Engineering Congress.
  90. Leger J., Pascoa J. C., Xisto C., (2015) “3D Effects in Cyclorotor Propulsion Systems”, ASME International Mechanical Engineering Congress.
  91. Trancossi M., Dumas A., Cimarelli A., Pascoa J. C., (2015) “MAAT cruiser/feeder airship design: intrinsic stability and energetic flight model”, ASME International Mechanical Engineering Congress.
  92. Dias F., Páscoa J., Xisto C., Abdollahzadeh M., Rodrigues F., (2015) “Simulação CFD de alhetas de saída com atuadores DBD para a tubeira HOMER”, In International Conference on Engineering ICEUBI’2015, Covilhã, Portugal.
  93. Rodrigues F., Páscoa J., Dias F., (2015) “Caracterização da potência consumida por atuadores a plasma DBD para controlo da camada limite”, In International Conference on Engineering ICEUBI’2015, Covilhã, Portugal.
  94. Trancossi, M., Dumas, A., Niccolai, G., and Pascoa, J., (2015) “Energy Self Sufficient Aircrafts Can Become Reality through New Propulsion Design Approaches,” SAE Technical Paper 2015-01-2484.
  95. Trancossi, M., Bingham, C., Capuani, A., Das, S., Páscoa, J.C. et al., (2015) “Multifunctional Unmanned Reconnaissance Aircraft for Low-Speed and STOL Operations,” SAE Technical Paper 2015-01-2465.
  96. Trancossi, M., Dumas, A., Madonia, M., Subhash, M. Páscoa J.C., (2015) “Preliminary Implementation Study of ACHEON Thrust and Vector Electrical Propulsion on a STOL Light Utility Aircraft,” SAE Technical Paper 2015-01-2422.
  97. Silvestre, M.A.R., Morgado, J., Alves, P., Santos, P., Gamboa, P., Páscoa, J.C. (2015) “Low Reynolds Number Propeller Performance Testing”, 5th WSEAS International Conference on Fluid Mechanics, pp. 1-11.
  98. Páscoa, J. C., Rodrigues, F., Das, S. S., Abdollahzadeh, M, Dumas, A., Trancossi, M., Subhash, M. (2014), “Exit flow vector control on a Coanda nozzle using dielectric barrier discharge actuator” ASME International Congress.
  99. Xisto, C. M., Páscoa, J. C., Leger, J. A., Trancossi, M. (2014), “Wind Energy Production Using An Optimized Variable Pitch Vertical Axis Rotor” ASME International Congress.
  100. Xisto, C. M., Páscoa, J. C., Leger, J. A. (2014), “Cycloidal Rotor Propulsion System With Plasma Enhanced Aerodynamics” ASME International Mechanical Engineering Congress.
  101. Xisto, C. M., Páscoa, J. C., and Leger, J. A. (2014) “Multi-Dielectric Barrier Discharge plasma actuator for cycloidal rotor active flow control”, 4th EASN Association International Workshop.
  102. Leger, J. A, Páscoa, J. C., and Xisto, C. M. (2014) “Aerodynamic Optimization of Cyclorotors”, 4th EASN Association International Workshop on Flight Physics and Aircraft Design.
  103. Carlos M Xisto, José C Páscoa, Jakson A Leger, Pierangelo Masarati, Giuseppe Quaranta, Marco Morandini, Louis Gagnon, D Wills, M Schwaiger, (2014) “Numerical modeling of geometrical effects in the performance of a cycloidal rotor”, ECCM 6th European Conference.
  104. Trancossi, M., Dumas, A., Xisto, C. M., Páscoa, J. C., Andrisani, A. (2014), “Roto-Cycloid propelled airship dimensioning and energetic equilibrium” SAE 2014 Aerospace System Conference.
  105. Gagnon, L., Morandini, M., Quaranta, G., Muscarello, V., Masarati, P., Bindolino, G., Xisto, C. M., Pascoa, J. C. (2014) “Feasibility Assessment: A Cycloidal Rotor to Replace Conventional Helicopter Technology”, Proc. European Rotorcraft Forum 2014.
  106. Gagnon, L., Quaranta, G., Morandini, M., Masarati, P., Lanz, M., Xisto, C.M., Páscoa, J.C. (2014) “Aerodynamic and aeroelastic analysis of a cycloidal rotor” 44th AIAA Fluid Dynamics Conference.
  107. Xisto, C. M., Páscoa, J. C., and Oliveira, P. J. (2013) “Numerical Modelling of a Self-Field Magnetoplasmadynamic Thruster”, In International Conference on Engineering UBI2013.
  108. Leger, J. A., Páscoa, J. C., and Xisto, C. M. (2013). “Kinematic and Dynamic Parametric Analysis of Cycloidal Rotor Thrusters”, In International conference on Engineering UBI2013.
  109. Shyam S. Das, J. C. Páscoa, A. Dumas, M. Trancossi (2013). “3D CFD modeling in the Novel ACHEON Propulsion System”, In International Conference on Engineering UBI2013.
  110. Baptista A.R., Santos F.M.B.C., Páscoa J. C. (2013), “CPM na Gestão de Projectos multinacionais de investigação tecnológica no âmbito Europeu”, In International Conference on Engineering UBI2013.
  111. Rodrigues F., Páscoa J.C., Dumas A., Trancossi M. (2013), “Preliminary design, set up and testing of a plasma DBD actuator for boundary layer control”, In International Conference on Engineering UBI2013.
  112. Machado, T., Pascoa, J.C., Brojo, F., Xisto, C. (2013) “Numerical modeling of turbulent transitional MHD flow for boundary layer control”, SAE 2013 AeroTech Congress.
  113. Monteiro, J., Pascoa, J.C., Xisto, C. (2013) “Analytical modeling of a cyclorotor in forward flight” SAE 2013 AeroTech Congress & Exhibition.
  114. Trancossi, M., Pascoa, J. (2013) “Thermojet: An old idea can define a novel family of jets”, SAE 2013 AeroTech Congress & Exhibition.
  115. Xisto, C.M., Páscoa, J.C., Oliveira, P.J. (2013) “Modelling plasma flow on a self-field MPD thruster using a PISO based method”, 44th AIAA Conference.
  116. Morgado, J., Silvestre, M.A.R., Páscoa, J.C. (2013) “Full range airfoil polars for propeller blade element momentum analysis”, 2013 International Powered Lift Conference.
  117. Silvestre, M.A.R., Morgado, J., Páscoa, J.C. (2013) “JBLADE: A propeller design and analysis code” 2013 International Powered Lift Conference.
  118. Xisto, C.M., Páscoa, J.C., Oliveira, P.J. (2013) “Numerical modelling of electrode geometry effects on a 2D self-field MPD thruster” ASME International Congress.
  119. Leger, J.A., Páscoa, J.C., Xisto, C.M.(2013) “Analytic model able to assist in parametric design of cycloidal rotor thrusters” ASME International Mechanical Engineering Congress.
  120. Abdollahzadeh M., Páscoa J. C. , Oliveira P.J. (2012), “Numerical investigation on efficiency increase in high altitude propulsion systems using plasma actuators”, in Proc. ECCOMAS 2012, pp. 6563-6581.
  121. Xisto C.M., Páscoa J. C. , Oliveira P.J. (2012), “Introduction of a new algorithm for the MHD equations at all Mach number regimes”, in Proc. ECCOMAS 2012, pp. 6515-6562.
  122. C.M. Xisto, J.C. Páscoa, P.J. Oliveira, D.A. Nicolini (2011), “Proposal and Testing of a New Hybrid Pressure Density Based Algorithm for MPD Thruster Simulations”, in Proc. CMNE 2011, APMTAC, pp. 11.
  123. Xisto C.M., Páscoa J. C. , Oliveira P.J. (2011), “Reformulation of the PISO method for predicting flows at all speeds using AUSM+up flux definitions”, in Proc. ICEUBI’2011, pp. 18.
  124. Xisto C.M., Páscoa J.C., Oliveira P.J., Nicolini D.A. (2010), “Implementation of a 3D compressible MHD Solver Able to Model Transonic Flows”, in Proc. V European Conference ECCOMAS CFD 2010, pp. 14.
  125. Silva F.J., Páscoa J.C. , Pinheiro J.S., Martins D.J. (2010), “Turbulent Flowstructure Computation Inside a Pump PAT Using an Industrial Benchmark Test Case”, in Proc. ECCOMAS CFD 2010, 12 pp.
  126. Páscoa J.C., Brójo F. M. P., Monteiro J. M. M. (2009), “Numerical Simulation of Magnetoplasma Thrusters for Aerospace Propulsion”, Proc. 14th International Conference on Emerging Nuclear Energy Systems, pp. 6.
  127. Monteiro J. M. M., Páscoa J. C., Brójo F . M. R. P. (2009), “Simulation of the Aerodynamic Behavior of a Micro Wind Turbine”, Proc. ICREPQ’09, pp. 6.
  128. Páscoa J. C., Xisto C. M. C. (2008), “Computational Modeling of Sweep and Lean Effects on 3D Turbine Blades for Performance assessment”, Proc. ENCIT 2008, pp. 8.
  129. Páscoa J. C., Mendes A. C., Gato L. M. C. (2008), “Redesigning Annular Turbine Blade Rows Using a Viscous-Inviscid Inverse Design Method”, Proc. ASME Turbo Expo 2008.
  130. Páscoa J. C., Mendes A. C., (2006), “Turbine Blade Duty Re-Design by Controlling Lean and Sweep Using an Innovative Iterative Inverse Design Method”, Proc. ASME Turbo Expo 2006.
  131. Páscoa J. C., Mendes A. C., (2005), “A Imposição da Carga num Método de Projecto Aerodinâmico de Pás de Turbomáquinas”, Proc. VII Congreso de Metodos Numéricos en la Ingenieria, pp. 12.
  132. Páscoa J. C., Mendes A. C., Gato L. C., (2004), “An Improved Inverse Design Method for Blades of Finite Thickness”, Proc. International Conference on Computational Engineering, pp. 581-586.
  133. Páscoa J. C., Mendes A. C., Gato L. C., Borges J.E.T., (2003), “Um Método Numérico para Projecto de Cascatas de Pás de Turbomáquinas em Regime Transónico”, Proc. CIBEM 6, pp. 1537-1542.
  134. Mendes A. C., Martins A. M., Marques B. T., Páscoa J. C., (2003), “Projecto e Análise de Desempenho do Rotor de um Ventilador Axial Industrial”, Proc. CIBEM 6, pp. 1531-1536.
  135. Páscoa J. C., Mendes A. C., Gato L. C., (2002), “Projecto de Cascatas de Pás Rectilíneas Através de um Método Inverso Baseado na Resolução das Equações de Euler”, Proc. V Congreso de Metodos Numéricos, pp. 13.
error: Content is protected !!