International Journal Articles


Journal Articles (48)

  1. Shvydyuk, K. O., Rodrigues, F. F., Nunes-Pereira, J., Páscoa, J. C., & Silva, A. P. (2025, March). Thermal Characterization of Ceramic Composites for Optimized Surface Dielectric Barrier Discharge Plasma Actuators. In Actuators (Vol. 14, No. 3, p. 127). MDPI.
    Thermal Characterization of Ceramic Composites for Optimized Surface Dielectric Barrier Discharge Plasma Actuators
  2. Nunes, G., Moreira, M., Rodrigues, F., & Páscoa, J. (2025, March). Experimental Analysis of Electrohydrodynamic Jet Actuation Modes Based on the Phase Doppler Technique. In Actuators (Vol. 14, No. 3, p. 141). MDPI.
    Experimental Analysis of Electrohydrodynamic Jet Actuation Modes Based on the Phase Doppler Technique
  3. Pendar, M. R., Cândido, S., Páscoa, J. C., & Lima, R. (2025). Enhancing Automotive Paint Curing Process Efficiency: Integration of Computational Fluid Dynamics and Variational Auto-Encoder Techniques. Sustainability, 17(7), 3091.
    Enhancing Automotive Paint Curing Process Efficiency: Integration of Computational Fluid Dynamics and Variational Auto-Encoder Techniques
  4. Teixeira, O., & Páscoa, J. (2025). Numerical Analysis of a Hypersonic Body Under Thermochemical Non-Equilibrium and Different Catalytic Surface Conditions. Actuators, 14(2), 102. https://doi.org/10.3390/act14020102
  5. Teixeira, O., & Páscoa, J. (2025). Numerical Analysis of a Hypersonic Body Under Thermochemical Non-Equilibrium and Different Catalytic Surface Conditions. Actuators, 14(2), 102. https://doi.org/10.3390/act14020102
  6. Moreira, M., Rodrigues, F., & Páscoa, J. (2025). An experimental study on the use of dielectric barrier discharge plasma actuators for electrospray dynamics enhancement. Physics of Fluids, 37(2).
    An experimental study on the use of dielectric barrier discharge plasma actuators for electrospray dynamics enhancement
  7. Mbanguine, L., Rodrigues, F., & Páscoa, J. (2025). New Electro-Active Polymers-Based Plasma Actuators for Simultaneous Flow Control and Ice Protection. Journal of Fluids Engineering, 1-31.
    New Electro-Active Polymers-Based Plasma Actuators for Simultaneous Flow Control and Ice Protection
  8. Benmoussa, A., Pendar, M. R., & Páscoa, J. C. (2025). Enhancing electrostatic spray-painting efficiency with modified high-voltage conductors: A numerical study on pulsed electric fields. Journal of Aerosol Science, 184, 106491.
    Enhancing electrostatic spray-painting efficiency with modified high-voltage conductors: A numerical study on pulsed electric fields
  9. Trancossi, M., & Pascoa, J. (2025). Energy and exergy analysis based design of a series hybrid electric vehicle (No. 2025-01-8596). SAE Technical Paper.
  10. Bagherighajari, F.,Abdollahzadehsangroudi, M., Páscoa, J.C. (2025) “Methane/Air Flame Control in Non-Premixed Bluff Body Burners Using Ring-Type Plasma Actuators”, Actuators 14 (2), 47
    Methane/Air Flame Control in Non-Premixed Bluff Body Burners Using Ring-Type Plasma Actuators
  11. Chekifi, T., Boukraa, M., & Benmoussa, A. (2024). Artificial Intelligence for thermal energy storage enhancement: A Comprehensive Review. Journal of Energy Resources Technology.
    Artificial Intelligence for Thermal Energy Storage Enhancement: A Comprehensive Review
  12. Chekifi, T., Benmoussa, A., & Boukraa, M. (2024). Desalination Powered by Renewables: A Challenge and an AI Opportunity. Water Resources Management, 1-43.
    Desalination Powered by Renewables: A Challenge and an AI Opportunity
  13. Teixeira, O., & Pascoa, J. (2024). Computational Modelling of Hypersonic Nozzles: The Influence of Enthalpy on the Flow Thermochemistry (No. 2024-01-1935). SAE Technical Paper.
  14. Cândido, S., & Páscoa, J. C. (2024). Data-driven surrogate modelling of multistage Taylor cone–jet dynamics. Physics of Fluids, 36(5).
  15. Trancossi, M., Pascoa, J., & Catellani, T. (2024). Guidelines Toward an Expansive Exergy-Based Fiscal System That Encourages Energy Transition and Societal Wellness. International Journal of Sustainable Development & Planning, 19(11).
  16. Barzegar Gerdroodbary, M., Shiryanpoor, I., Salavatidezfouli, S., Abazari, A. M., & Pascoa, J. C. (2024). Optimizing aerodynamic stability in compressible flow around a vibrating cylinder with deep reinforcement learning. Physics of Fluids, 36(12).
  17. Benmoussa, A., & Páscoa, J. C. (2024). A Chamfered Anchor Impeller Design for Enhanced Efficiency in Agitating Viscoplastic Fluids. Fluids, 9(12), 288.
  18. Loureiro Martinho, D., Abdollahzadehsangroudi, M., Berning, T. (2024) “Computational Fluid Dynamics Analysis of Gas Crossover in an Alkaline Electrolyzer Using a Multifluid Model”, ECS Transactions 114 (5), 727
    Computational Fluid Dynamics Analysis of Gas Crossover in an Alkaline Electrolyzer Using a Multifluid Model
  19. Rodrigues, F., Moreira, M., & Páscoa, J. (2024). Characterization of Plasma-Induced Flow Thermal Effects for Wind Turbine Icing Mitigation. Energies, 17(16), 3974.
    Characterization of Plasma-Induced Flow Thermal Effects for Wind Turbine Icing Mitigation
  20. Shvydyuk, K. O., Nunes-Pereira, J., Rodrigues, F. F., Páscoa, J. C., Lanceros-Mendez, S., & Silva, A. P. (2024). Holistic Characterization of MgO-Al2O3, MgO-CaZrO3, and Y2O3-ZrO2 Ceramic Composites for Aerospace Propulsion Systems. Ceramics, 7(1), 364-384
    Holistic Characterization of MgO-AlO, MgO-CaZrO, and YO-ZrO Ceramic Composites for Aerospace Propulsion Systems
  21. Rodrigues, F. F., Shvydyuk, K. O., Nunes-Pereira, J., Páscoa, J. C., & Silva, A. P. (2024). Plasma Actuators Based on Alumina Ceramics for Active Flow Control Applications. Ceramics, 7(1), 192-207
    Plasma Actuators Based on Alumina Ceramics for Active Flow Control Applications
  22. Periyadurai, K., Pascoa, J. C. , Abdollahzadehsangroudi, M. , Oliveira, P. J. (2024), Numerical modeling of magnetohydrodynamic non-Newtonian flow in a cross-slot,Polym Eng Sci; 64(5): 2157-2177
    Numerical modeling of magnetohydrodynamic non-Newtonian flow in a cross-slot
  23. Sheibani, M.,  Malek Jafarian, S.M.,  Abdollahzadehsangroudi, M. (2024) “Impact of annular nanosecond plasma actuators on drag reduction in transonic flow”, Physics of Fluids 36, 116121
    Impact of annular nanosecond plasma actuators on drag reduction in transonic flow
  24. Abdollahzadehsangroudi, M. , Francisco, M., Lopes, R., Dolati, F., Pascoa, J.C., Rodrigues, F. (2024) “Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance”, Physics of Fluids 36, 042015
    Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance
  25. Benmoussa, A. (2023). Agitation of Viscoplastic Fluid in a Rotating Vessel Using Close Clearance Agitators. Eng, 4(4), 2525-2541.
    Agitation of Viscoplastic Fluid in a Rotating Vessel Using Close Clearance Agitators
  26. Shvydyuk, K. O., Nunes-Pereira, J., Rodrigues, F. F., & Silva, A. P. (2023). Review of ceramic composites in aeronautics and aerospace: A multifunctional approach for TPS, TBC and DBD applications. Ceramics, 6(1), 195-230.
    Review of Ceramic Composites in Aeronautics and Aerospace: A Multifunctional Approach for TPS, TBC and DBD Applications
  27. Mohammadi, A., Dolati, F., Hassani, F., Páscoa, J.C., Abdollahzadehsangroudi, M. (2023), Numerical Analysis and Optimization of Heat Transfer Enhancement on a Flat Plate by an EHD Jet,International Journal of Heat and Mass Transfer 217, 124707
    Numerical analysis and optimization of heat transfer enhancement on a flat plate by an EHD jet
  28. Diogo Loureiro Martinho, Torsten Berning, Mohammadmahdi Abdollahzadehsangroudi, Anders Rønne Rasmussen, Jakob Hærvig and Samuel Simon Araya (2023), A Three-Dimensional, Multiphysics Model of An Alkaline Electrolyzer,ECS Trans. 112 433
    A Three-Dimensional, Multiphysics Model of An Alkaline Electrolyzer
  29. Benmoussa, A., Rodrigues, F.F., Páscoa, J.C. (2023) “Plasma Actuators for Cycloidal Rotor Thrust Vectoring Enhancement in Airships”, Actuators, 12(12),436
    Plasma Actuators for Cycloidal Rotor Thrust Vectoring Enhancement in Airships
  30. Cândido, S., Páscoa, J.C. (2023) “On modal decomposition as surrogate for charge-conservative EHD modelling of Taylor Cone jets”, International Journal of Engineering Science, 193,103947
    On modal decomposition as surrogate for charge-conservative EHD modelling of Taylor Cone jets
  31. Khasare, S., Bagherighajari, F., Dolati, F., (…), Pascoa, J.C., Abdollahzadeh, M. (2023) “Control of the flame and flow characteristics of a non-premixed bluff body burner using dielectric barrier discharge plasma actuators”, Applied Thermal Engineering 235,121432
    Control of the flame and flow characteristics of a non-premixed bluff body burner using dielectric barrier discharge plasma actuators
  32. Shvydyuk, K.O., Rodrigues, F.F., Nunes-Pereira, J., (…), Lanceros-Mendez, S., Silva, A.P. (2023) “Long-lasting ceramic composites for surface dielectric barrier discharge plasma actuators”, Journal of the European Ceramic Society 43(14), pp. 6112-6121
    Long-lasting ceramic composites for surface dielectric barrier discharge plasma actuators
  33. Bagherighajari, F., Moradi Bilondi, A., Abdollahzadehsangroudi, M., Hamrang, A., Páscoa, J.C. (2023) “A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate-blocked interdigitated flow field designs”, Fuel Cells 23(4), pp. 304-322
    A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate-blocked interdigitated flow field designs
  34. Khasare, S., Bagherighajari, F., Dolati, F., (…), Páscoa, J., Abdollahzadehsangroudi, M. (2023) “The effect of the dielectric barrier discharge plasma actuator in the control of non-reactive flow in a non-premixed bluff body burner”, Physics of Fluids 35(7),075135
    The effect of the dielectric barrier discharge plasma actuator in the control of non-reactive flow in a non-premixed bluff body burner
  35. Pendar, M.-R., Cândido, S., Páscoa, J.C. (2023) “Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset”, Physics of Fluids 35(7),075119
    Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset
  36. Cândido, S., Páscoa, J.C. (2023) “Dynamics of three-dimensional electrohydrodynamic instabilities on Taylor cone jets using a numerical approach”, Physics of Fluids 35(5),052110
    Dynamics of three-dimensional electrohydrodynamic instabilities on Taylor cone jets using a numerical approach
  37. Hamrang, A., Abdollahzadeh, M., Bilondi, A.M., (…), Rahgoshay, S.M., Pascoa, J.C. (2023) “Comparison of PEMFC performance with parallel serpentine and parallel serpentine-baffled flow fields under various operating and geometrical conditions; a parametric study”, International Journal of Hydrogen Energy 48(20), pp. 7442-7459
    Comparison of PEMFC performance with parallel serpentine and parallel serpentine-baffled flow fields under various operating and geometrical conditions; a parametric study
  38. Teixeira, O., Páscoa, J. (2023) ” Catalytic wall effects for hypersonic nozzle flow in thermochemical non-equilibrium”, Acta Astronautica, 203, pp. 48-59
    Catalytic wall effects for hypersonic nozzle flow in thermochemical non-equilibrium
  39. Benmoussa, A., Páscoa, J.C. (2023) “Enhancement of a cycloidal self-pitch vertical axis wind turbine performance through DBD plasma actuators at low tip speed ratio”, International Journal of Thermofluids, 17,100258
    Enhancement of a cycloidal self-pitch vertical axis wind turbine performance through DBD plasma actuators at low tip speed ratio
  40. Rodrigues, F., Abdollahzadehsangroudi, M., Nunes-Pereira, J., Páscoa, J. (2023) “Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation”, Actuators 12(1),5
    Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation
  41. Moreira, M., Rodrigues, F., Cândido, S., Santos, G., Páscoa, J.  (2023) “Development of a Background-Oriented Schlieren (BOS) System for Thermal Characterization of Flow Induced by Plasma Actuators”, Energies 16(1),540
    Development of a Background-Oriented Schlieren (BOS) System for Thermal Characterization of Flow Induced by Plasma Actuators
  42. Moradi Bilondi, A., Bagherighajari, F., Abdollahzadehsangroudi, M., Kermani, M.J., Páscoa, J.C. (2022) “The Role of Porous Carbon Inserts on the Performance of Polymer Electrolyte Membrane Fuel Cells: A Parametric Numerical Study”, Energy Technology 10(12),2200966
    The Role of Porous Carbon Inserts on the Performance of Polymer Electrolyte Membrane Fuel Cells: A Parametric Numerical Study
  43. Hamrang, A., Abdollahzadeh, M., Kermani, M. J., & Rahgoshay, S. M. (2022). Numerical simulation of the PEM fuel cell performance enhancement by various blockage arrangement of the cathode serpentine gas flow channel outlets/inlets. International Journal of Heat and Mass Transfer, 186, 122475.
    Numerical simulation of the PEM fuel cell performance enhancement by various blockage arrangement of the cathode serpentine gas flow channel outlets/inlets
  44. Bagherighajari, F., Abdollahzadehsangroudi, M., Esmaeilpour, M., Dolati, F., Páscoa, J. (2022) “Novel converging-diverging microchannel heat sink with porous fins for combined thermo-hydraulic performance”, Physics of Fluids 34(11),0118700
    Novel converging-diverging microchannel heat sink with porous fins for combined thermo-hydraulic performance
  45. Pendar, M.-R., Rodrigues, F., Páscoa, J.C., Lima, R. (2022) “Review of coating and curing processes: Evaluation in automotive industry”, Physics of Fluids, 34(10),101301.
    Review of coating and curing processes: Evaluation in automotive industry
  46. Bagherighajari, F.; Ramiar, A.; Abdollahzadehsangroud, M.; Pascoa, J.; Oliveira, P. (2022) “Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields”, International Journal of Energy Research, pp. 23.
    Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields
  47. Pendar, R., Páscoa, J. (2022) “Numerical Investigation of Plasma Actuator Effects on Flow Control Over a Three-Dimensional Airfoil With a Sinusoidal Leading Edge”, Journal of Fluids Engineering, 144(8): 081208.
    Numerical Investigation of Plasma Actuator Effects on Flow Control Over a Three-Dimensional Airfoil With a Sinusoidal Leading Edge
  48. M. Abdollahzadeh, F. Rodrigues, J. Nunes-Pereira, J.Pascoa, L. Pires (2022) “Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application”, Sensors and Actuators: A. Physical, pp. 1-25.
    Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application
  49. Trancossi, M., Pascoa, J.C., Sharma, S. (2022) “Response to Comment on: A Critical Review on Heat and Mass Transfer Modelling of Viral Infection and Virion Evolution the Case of SARS-COV2”, Thermal Science, 26(2), pp. 1219-1228.
    Response to Comment on: A Critical Review on Heat and Mass Transfer Modelling of Viral Infection and Virion Evolution the Case of SARS-COV2
  50. J. Nunes-Pereira, F. Rodrigues, M. Abdollahzadeh, S. Lanceros-Mendez, J. Páscoa (2021) “Improved performance of polyimide Cirlex-based dielectric barrier discharge plasma actuators for flow control”,  Polymers for Advanced Technologies, pp. 1-13.
    Improved performance of polyimide Cirlex-based dielectric barrier discharge plasma actuators for flow control
  51. Pendar, R., Páscoa, J. (2021) “Numerical analysis of charged droplets size distribution in the electrostatic coating process: Effect of different operational conditions”,  Physics of Fluids, 33, 033317-24.
    Numerical analysis of charged droplets size distribution in the electrostatic coating process: Effect of different operational conditions
  52. M Rami, J Páscoa (2021) “Active control assessments towards optimizing the performance of a cycloidal rotor at hover”,  Aerospace Science and Technology, 119, pp. 107141-16.
    Active control assessments towards optimizing the performance of a cycloidal rotor at hover
  53. Trancossi M., Pascoa J., Mazzacurati S. (2021) “Sociotechnical design a review and future interdisciplinary perspectives involving thermodynamics in today societal contest”,  International Communications in Heat and Mass Transfer, 128, pp. 105622-13.
    Sociotechnical design a review and future interdisciplinary perspectives involving thermodynamics in today societal contest
  54. M Rami, J Páscoa (2021) “Coupled Active Control Technique for Oscillating Blades in a Cycloidal Rotor Using CFD and ANN Analysis by Including 3D End Wall Effects”,  ASCE’s Journal of Aerospace Engineering, 34(6), pp. 17.
    Coupled Active Control Technique for Oscillating Blades in a Cycloidal Rotor Using CFD and ANN Analysis by including 3D End Wall Effects
  55. A Benmoussa, J Páscoa (2021) “Performance improvement and start-up characteristics of a cyclorotor using multiple plasma actuators”, Meccanica, pp. 24
    Performance improvement and start-up characteristics of a cyclorotor using multiple plasma actuators
  56. A Benmoussa, J Páscoa (2021) “Cycloidal rotor coupled with DBD plasma actuators for performance improvement”, Aerospace Science and Technology, pp. 14
    Cycloidal rotor coupled with DBD plasma actuators for performance improvement
  57. M. Trancossi, C. Carli, G. Cannistraro, J. Páscoa, S. Sharma (2021) “Could thermodynamics and heat and mass transfer research produce a fundamental step advance toward and significant reduction of SARS-COV-2 spread?”, International Journal of Heat and Mass Transfer, pp. 16 (in press)
    Could thermodynamics and heat and mass transfer research produce a fundamental step advance toward and significant reduction of SARS-COV-2 spread?
  58. M Rami, J Páscoa (2021) “Performance Optimization of Forward-Flight and Lift-Up Phases in a Cycloidal rotor Using an Active Control Mechanism”,  ASCE’s Journal of Aerospace Engineering, 34(4), pp. 18.
    Performance Optimization of Forward-Flight and Lift-Up Phases in a Cycloidal Rotor Using an Active Control Mechanism
  59. Rodrigues, F., Abdollahzadeh, M., Pascoa, J., Oliveira, P. (2021) “An experimental study on segmented-encapsulated electrode dielectric-barrier-discharge plasma actuator for mapping ice formation on a surface: A conceptual analysis”, ASME Journal of Heat Transfer, 143(1): 011701, pp. 14.
    An Experimental Study on Segmented-Encapsulated Electrode Dielectric-Barrier-Discharge Plasma Actuator for Mapping Ice Formation on a Surface: A Conceptual Analysis
  60. Abdollahzadeh, M., Rodrigues, F., Pascoa, J.  (2020) “Simultaneous Ice Detection and Removal Based on Dielectric Barrier Discharge Actuators” Sensors and Actuators: A. Physical, 315, 112361
    Simultaneous ice detection and removal based on dielectric barrier discharge actuators
  61. Trancossi, M., Cannistraro, G., Pascoa, J. (2020) “Comments on “New insight into the definitions of the Bejan number””, International Communications in Heat and Mass Transfer, 10
    Comments on “New insight into the definitions of the Bejan number”
  62. Pendar, R., Páscoa, J. (2020) “Numerical modeling of the distribution of virus carrying saliva droplets during sneeze and cough”, Physics of Fluids, 32, pp. 083305.
    Numerical modeling of the distribution of virus carrying saliva droplets during sneeze and cough
  63. Pendar, R., Páscoa, J. (2020) “Atomization and Spray Characteristics around an ERBS Using Various Operational Models and Conditions: Numerical Investigation”, International Journal of Heat and Mass Transfer, 161, pp. 120243.
    Atomization and spray characteristics around an ERBS using various operational models and conditions: numerical investigation
  64. Amanifard, N., Abdollahzadeh, M, Moayedi, H., Pascoa, J. (2020) “An explicit CFD model for the DBD plasma actuators using wall-jet similarity Approach”, Journal of Electrostatics 107, pp. 103497.
    An explicit CFD model for the DBD plasma actuators using wall-jet similarity approach
  65. Trancossi, M., Cannistraro, G., Pascoa, J. (2020) “Thermoelectric and solar heat pump use toward self sufficient buildings: The case of a container house” Thermal Science and Engineering Progress, vol. 18, pp. 100509.
    Thermoelectric and solar heat pump use toward self sufficient buildings: The case of a container house
  66. Rodrigues, F., Páscoa, J. (2020) “Implementation of stair-shaped  dielectric layers in micro and macro plasma actuators for increased efficiency and lifetime”, Journal of Fluids Engineering (doi.org/10.1115/1.4047800)
    Implementation of Stair-Shaped Dielectric Layers in Micro and Macro Plasma Actuators for Increased Efficiency and Lifetime
  67. Pendar, M. and Pascoa, J. (2020) “Numerical Investigation of Electrostatic Spray Painting Transfer Processes for Vehicle Coating,” SAE International Journal Advances & Current Practice in Mobility 2(2):747-754.
    Numerical Investigation of Electrostatic Spray Painting Transfer Processes for Vehicle Coating
  68. Rami, M., Pascoa, J. (2020) “Numerical Analysis of a Cycloidal Rotor under Diverse Operating Conditions and Altitudes,” SAE International Journal Advances & Current Practice in Mobility 2(2):792-802.
    Numerical Analysis of a Cycloidal Rotor under Diverse Operating Conditions and Altitudes
  69. Teixeira, O.  Pascoa, J. (2020) “Hypersonic Flow Simulation towards Space Propulsion Geometries,” SAE International Journal Advances & Current Practice in Mobility 2(2):803-810.
    Hypersonic Flow Simulation towards Space Propulsion Geometries
  70. Trancossi, M., Pascoa, J. (2019) “Diffusive Bejan number and second law of thermodynamics toward a new dimensionless formulation of fluid dynamics laws”, Thermal Science, 23 (6) Part B, 4005-4022.
    Diffusive bejan number and second law of thermodynamics toward a new dimensionless formulation of fluid dynamics laws
  71. Pendar, M.-R., Páscoa, J.C. (2019) “Numerical modeling of electrostatic spray painting transfer processes in rotary bell cup for automotive painting”  International Journal of Heat and Fluid Flow, 80, 108499
    Numerical modeling of electrostatic spray painting transfer processes in rotary bell cup for automotive painting
  72. Trancossi, M., Pascoa, J.  (2019) “The influence of convective exchanges on coandã effect”, INCAS Bulletin, 11(4), pp. 191-202.
    The influence of convective exchanges on coandã effect
  73. Habibnia, M., Pascoa, J. (2019) “ANN assisted flow modeling and analysis for a cyclorotor in ground effect”, Aerospace Science and Technology, Vol 95, pp. 1-13.
    ANN assisted flow modeling and analysis for a cyclorotor in ground effect
  74. Trancossi, M., Pascoa, J. (2019) “Modeling fluid dynamics and aerodynamics by second law and Bejan number (Part 1 – theory)”, INCAS Bulletin, 11(3), pp. 169-180.
    Modeling fluid dynamics and aerodynamics by second law and Bejan number (Part 1 – theory)
  75. Rodrigues, F., Mushyam, A., Pascoa, J.C., Trancossi, M. (2019) “A new plasma actuator configuration for improved efficiency: The stair shaped dielectric barrier discharge (SSDBD) actuator,”Journal of Physics D: Applied Physics, DOI: 10.1088/1361-6463/ab2584.
    A new plasma actuator configuration for improved efficiency: The stair shaped dielectric barrier discharge (SSDBD) actuator
  76. Mushyam, A., Rodrigues, F., Pascoa, J.C. (2019) “A plasma-fluid model for EHD flow in DBD actuators and experimental validation,” International Journal for Numerical Methods in Fluids, DOI: 10.1002/fld.4714.
    A plasma-fluid model for EHD flow in DBD actuators and experimental validation
  77. K. Singh and J. C. Páscoa (2019) “Numerical Modeling of Stall and Poststall Events of a Single Pitching Blade of a Cycloidal Rotor,” Journal of Fluids Engineering, vol. 141, no. 1, pp. 011103-011103-16.
    Numerical Modeling of Stall and Poststall Events of a Single Pitching Blade of a Cycloidal Rotor
  78. Abdollahzadeh, M., Sedighi, A. A., & Esmailpour, M. (2018). Stagnation point flow of nanofluids towards stretching sheet through a porous medium with heat generation. Journal of Nanofluids, 7(1), 149-155.
    Stagnation point flow of nanofluids towards stretching sheet through a porous medium with heat generation
  79. Abdollahzadeh, M., Sedighi, A. A., & Esmaeilpour, M. (2018). Boundary layer and heat transfer analysis in liquid film of nanofluid over an unsteady stretching sheet. Journal of Nanofluids, 7(2), 371-377.
    Boundary layer and heat transfer analysis in liquid film of nanofluid over an unsteady stretching sheet
  80. Sangtabi, A. R., Ramiar, A., Ranjbar, A. A., Abdollahzadeh, M., & Kianifar, A. (2018). Influence of repetitive laser pulse energy depositions on supersonic flow over a sphere, cone and oblate spheroid. Aerospace Science and Technology, 76, 72-81.
    Influence of repetitive laser pulse energy depositions on supersonic flow over a sphere, cone and oblate spheroid
  81. Havaej, P., Kermani, M. J., Abdollahzadeh, M., Heidary, H., & Moradi, A. (2018). A numerical modeling study on the influence of catalyst loading distribution on the performance of Polymer Electrolyte Membrane Fuel Cell. International journal of hydrogen energy, 43(21), 10031-10047
    A numerical modeling study on the influence of catalyst loading distribution on the performance of Polymer Electrolyte Membrane Fuel Cell
  82. A. Ghanbarian, M.J. Kermani, J. Scholta, M. Abdollahzadeh (2018), Polymer electrolyte membrane fuel cell flow field design criteria – Application to parallel serpentine flow patterns,Energy conversion and management 166 ,281-296
    Polymer electrolyte membrane fuel cell flow field design criteria – Application to parallel serpentine flow patterns
  83. A. Moradi Bilondi, M. Abdollahzadeh, M.J. Kermani, H. Heidary, P. Havaej (2018), Numerical study of anode side CO contamination effects on PEM fuel cell performance; and mitigation methods,Energy conversion and management 177, 519-534.
    Numerical study of anode side CO contamination effects on PEM fuel cell performance; and mitigation methods
  84. Trancossi, M., Cannistraro, M., Pascoa, J. (2018) “Can constructal law and exergy analysis produce a robust design method that couples with industry 4.0 paradigms? The case of a container house“, Mathematical Modelling of Engineering Problems, 5(4), pp. 303-312.
    Can constructal law and exergy analysis produce a robust design method that couples with industry 4.0 paradigms? The case of a container house
  85.  M. Trancossi, J. C. Páscoa (2018) “A new dimensionless approach to general fluid dynamics problems that accounts both the first and the second law of thermodynamics, Mathematical Modelling of Engineering Problems, 5(4), pp. 331-340
    A new dimensionless approach to general fluid dynamics problems that accounts both the first and the second law of thermodynamics
  86. M. Trancossi, J. C. Páscoa (2018) “Design of ventilated cross flow heat sinks, Modelling, Measurement and Control C, 79(3), pp. 90-97
    Design of ventilated cross flow heat sinks
  87. F. Rodrigues, JC Páscoa, M. Trancossi (2018) “Experimental analysis of DBD plasma actuators thermal characteristics under external flow influence“, Journal of Heat Transfer, ASME, Vol 140 (10), pp 20
    Experimental Analysis of Dielectric Barrier Discharge Plasma Actuators Thermal Characteristics under External Flow Influence
  88. M Abdollahzadeh, JC Páscoa, P Oliveira (2018) “Comparison of DBD Plasma Actuators Flow Control Authority in Different Modes of Actuation”, Aerospace Science and Technology, Elsevier, doi: pp 20
    Comparison of DBD plasma actuators flow control authority in different modes of actuation
  89. L Gagnon, M Morandini, G Quaranta, P Masarati, C Xisto, J Páscoa (2018) “Aeroelastic Analysis of a Cycloidal Rotor Under Various Operating Conditions”, Journal of Aircraft, AIAA, doi:10.2514/1.C034005
    Aeroelastic analysis of a cycloidal rotor under various operating conditions
  90. Zehtabiyan-Rezaie, N., Arefian, A., Kermani, M. J., Noughabi, A. K., & Abdollahzadeh, M. (2017). Effect of flow field with converging and diverging channels on proton exchange membrane fuel cell performance. Energy Conversion and Management, 152, 31-44.
    Effect of flow field with converging and diverging channels on proton exchange membrane fuel cell performance
  91. F Rodrigues, J Páscoa, M Trancossi (2017) “Heat Generation Mechanisms of DBD Plasma Actuators”, Experimental Thermal and Fluid Science, 12.
    Heat generation mechanisms of DBD plasma actuators
  92. M Abdollahzadeh, M Esmaeilpour, R Vizinho, A Younesi, J Pascoa (2017) “Assessment of RANS turbulence models for numerical study of laminar-turbulent transition in convection heat transfer”, International Journal of Heat and Mass Transfer 115.
    Assessment of RANS turbulence models for numerical study of laminar-turbulent transition in convection heat transfer
  93. Ramiar, A., Mahmoudi, A. H., Esmaili, Q., & Abdollahzadeh, M. (2016). Influence of cathode flow pulsation on performance of proton exchange membrane fuel cell with interdigitated gas distributors. Energy, 94, 206-217.
    Influence of cathode flow pulsation on performance of proton exchange membrane fuel cell with interdigitated gas distributors
  94. M. Abdollahzadeh, José Páscoa, Paulo Jorge Oliveira (2016) “Implementation of the Classical Plasma-Fluid Model for Simulation of the Dielectric Barrier Discharge (DBD) Actuators in OpenFOAM”, Volume 128, Computers and Fluids, pp. 77–90.
    Implementation of the classical plasma–fluid model for simulation of dielectric barrier discharge (DBD) actuators in OpenFOAM
  95. Leger J. A., Páscoa J. C., Xisto C. M., (2016) “Aerodynamic optimization of cyclorotors” Aircraft Engineering and Aerospace Technology, Vol. 88, No. 2, pp.232 – 245.
    Aerodynamic optimization of cyclorotors
  96. Trancossi, M., Mohammedalamin, O., Pascoa, JC., Rodrigues, F. (2016) “Thermodynamic Analysis and Preliminary Design of the Cooling System of a Pulsejet for Aeronautic Propulsion”, International Journal of Heat and Technology, Vol. 34, pp. 528-534.
    Thermodynamic analysis and preliminary design of the cooling system of a pulsejet for aeronautic propulsion
  97. Trancossi, M., Pascoa, JC., Xisto, CM. (2016) “Design of an Innovative Off Road Hybrid Vehicle by Energy Efficiency Criteria” International Journal of Heat and Technology, Vol. 34, pp. 387-395.
    Design of an innovative off road hybrid vehicle by energy efficiency criteria
  98. Xisto C. M., Páscoa J. C., Trancossi M., (2016) “Geometrical Parameters Influencing the Aerodynamic Efficiency of a Small-Scale Self-Pitch High-Solidity VAWT” Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, Vol. 138, No. 3, pp. 8.
    Geometrical Parameters Influencing the Aerodynamic Efficiency of a Small-Scale Self-Pitch High-Solidity VAWT
  99. Morgado, J., Vizinho R., Silvestre, M. A. R. and Páscoa, J. C. (2016) “XFOIL vs CFD performance predictions for high lift low Reynolds number airfoils” Aerospace Science and Technology, Vol. 52, pp. 207-214.
    XFOIL vs CFD performance predictions for high lift low Reynolds number airfoils
  100. Trancossi M., Stewart J., Dumas A., Madonia M., Pascoa J. (2016) “Constructal Design of an Entropic Wall With Circulating Water Inside” Journal of Heat Transfer, Vol. 138 (8), pp. 9.
    Constructal Design of an Entropic Wall with Circulating Water Inside
  101. Xisto C., Leger J., Páscoa J. et al. (2016) “Parametric Analysis of a Large-scale Cycloidal Rotor in Hovering Conditions”. ASCEs Journal of Aerospace Engineering, in press, DOI: 10.1061/(ASCE)AS.1943-5525.0000658.
    Parametric Analysis of a Large-Scale Cycloidal Rotor in Hovering Conditions
  102. Trancossi M, Madonia M., Dumas A., Angeli D., Bingham C., Das S., Grimaccia F., Páscoa, J. C. et al (2016) “A new aircraft architecture based on the ACHEON Coanda effect nozzle: flight model and energy evaluation” European Transport Research Review, Vol. 8, pp. 1-21.
    A new aircraft architecture based on the ACHEON Coanda effect nozzle: flight model and energy evaluation
  103. Morgado, J., Silvestre, M. A. R. and Páscoa, J. C. (2016) “A Comparison of Post-Stall Models Extended for Propeller Performance Prediction” Aircraft Engineering and Aerospace Technology, Vol. 88, No. 4, pp. 12.
    A comparison of post-stall models extended for propeller performance prediction
  104. Shyam S. Das, Jose C. Páscoa, M. Trancossi, A. Dumas (2016) “CFD study on a Novel Propulsion System: ACHEON and Its Integration with an Unmanned aerial Vehicle (UAV)”, ASCEs Journal of Aerospace Engineering, Vol. 29, No. 1, 04015015-1 – 04015015-16.
    Computational fluid dynamic study on a novel propulsive system: ACHEON and its integration with an Unmanned Aerial Vehicle (UAV)
  105. A Baptista, F Santos, J Páscoa, N Sändig (2016) “Project Management Methodologies as Main Tool for Current Challenges in Global Economy Driving Historical Changes”, Journal of Advanced Management Science, Vol 4 (2) pp. 1-7.
  106. Abdollahzadeh, M., & Esmaeilpour, M. (2015). Enhancement of phase change material (PCM) based latent heat storage system with nano fluid and wavy surface. International journal of heat and mass transfer, 80, 376-385.
    Enhancement of phase change material (PCM) based latent heat storage system with nano fluid and wavy surface
  107. Vizinho, R., Páscoa, J., Silvestre, M. (2015) “Turbulent transition modeling through mechanical considerations”, Applied Mathematics and Computation, Vol 269, pp. 308-325.
    Turbulent transition modeling through mechanical considerations
  108. Vizinho, R., Morgado, J., Páscoa, J., Silvestre, M. (2015) “Analysis of transitional flow in 3D geometries using a novel phenomenological model”, Aerospace Science and Technology, Vol. 45, pp. 431-441.
    Analysis of transitional flow in 3D geometries using a novel phenomenological model
  109. Baptistaa, AA, Charrua-Santos, F, Páscoa, JC (2015) “Prevention and Risk Management in RTD European Projects Developed by University-Company’s Consortiums”, Procedia Computer Science, Vol. 64, pp. 403-408.
    Prevention and Risk Management in RTD European Projects Developed by University-Company’s Consortiums
  110. Morgado, J., Abdollahzadeh, M., Silvestre, M.A.R., Páscoa, J.C (2015) “High altitude propeller design and analysis”, Aerospace Science and Technology, Vol. 45, pp. 398-407.
    High altitude propeller design and analysis
  111. Xisto, C.M., Páscoa, J.C., Oliveira, P.J (2015) “Numerical analysis of real gas MHD flow on two-dimensional self-field MPD thrusters”, Acta Astronautica, Vol. 112, pp. 89-101.
    Numerical analysis of real gas MHD flow on two-dimensional self-field MPD thrusters
  112. Silvestre, M.A.R., Morgado, J., Alves, P., Santos, P., Gamboa, P., Páscoa, J.C. (2015) “Propeller performance measurements at low Reynolds numbers”, International Journal of Mechanics, Vol 9, pp. 154-166.
    Propeller performance measurements at low Reynolds numbers
  113. Ilieva, G., Páscoa, J., Dumas, A., Trancossi, M. (2015) Unsteady interaction effects between an airship and its air-jet propulsion system, Advanced Structured Materials, Vol. 44, pp. 127-143.
    Unsteady interaction effects between an airship and its air-jet propulsion system
  114. Leger J. A., Páscoa J. C., Xisto C. M., (2015) “Analytical Modeling of a Cyclorotor in Hovering State”, Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering, Vol. 229, No. 12, pp. 2163-2177.
    Analytical modeling of a cyclorotor in hovering state
  115. M. Abdollahzadeh, José Páscoa, Paulo Jorge Oliveira, F. Rodrigues (2015) “Numerical Design and Analysis of a Multi-DBD Actuator Configuration for the Experimental Testing of ACHEON Nozzle Model”, Aerospace Science and Technology, Vol. 41, pp. 259–273.
    Numerical design and analysis of a multi-DBD actuator configuration for the experimental testing of ACHEON nozzle model
  116. J. Morgado, M. A R. Silvestre, J. C. Páscoa (2015), “Validation of new formulations for propeller analysis”, AIAA Journal of Propulsion and Power, Vol. 31 (1), pp. 467-477.
    Validation of new formulations for propeller analysis
  117. AAR Baptista, MJM Silva, CM Cabrita, FB Santos, JC Pascoa (2014) “Technology Transfer as a Driver of Cooperation and Communication in a New Knowledge Management Methodology”, Lecture Notes on Information Theory, Vol 2 (3), pp. 259-265.
  118. Xisto, C.M., Páscoa, J.C., Oliveira, P.J. (2014) “A pressure-based high resolution numerical method for resistive MHD” Journal of Computational Physics, 275, pp. 323-345.
    A pressure-based high resolution numerical method for resistive MHD
  119. Das, S., Abdollahzadeh, M., Pascoa, J., Dumas, A., Trancossi, M. (2014) “Numerical modeling of coanda effect in a novel propulsive system”, International Journal of Multiphysics, 8 (2), pp. 181-201.
    Numerical modeling of coanda effect in a novel propulsive system
  120. M Trancossi, A Dumas, SS Das, J Pascoa (2014) “Design methods of Coanda effect nozzle with two streams”, INCAS Bulletin, Vol. 6 (1), pp.  83-95.
  121. A Dumas, M Subhash, M Trancossi, J Páscoa Marques (2014) “The Influence of Surface Temperature on Coanda Effect”, Energy Procedia, Vol. 45, pp. 626-634.
    The Influence of Surface Temperature on Coanda Effect
  122. Abdollahzadeh, M., Pascoa, J.C., Ranjbar, A.A., Esmaili, Q. (2014) “Analysis of PEM (Polymer Electrolyte Membrane) fuel cell cathode two-dimensional modeling”, Energy, Vol. 68, pp. 478-494.
    Analysis of PEM (Polymer Electrolyte Membrane) fuel cell cathode two-dimensional modeling
  123. Abdollahzadeh, M., Páscoa, J.C., Oliveira, P.J. (2014) “Two-dimensional numerical modeling of interaction of micro-shock wave generated by nanosecond plasma actuators and transonic flow” Journal of Computational and Applied Mathematics, Vol. 270, pp. 401-416.
    Two-dimensional numerical modeling of interaction of micro-shock wave generated by nanosecond plasma actuators and transonic flow
  124. Abdollahzadeh, M., Páscoa, J.C., Oliveira, P.J. (2014) “Modified split-potential model for modeling the effect of DBD plasma actuators in high altitude flow control”, Current Applied Physics, Vol. 14 (8), pp. 1160-1170.
    Modified split-potential model for modeling the effect of DBD plasma actuators in high altitude flow control
  125. Ilieva, G., Páscoa, J., Dumas, A., Trancossi, M. (2014) “MAAT – Promising innovative design and green propulsive concept for future airship’s transport”, Aerospace Science and Technology, Vol. 35 (1), pp. 1-14.
    MAAT – Promising innovative design and green propulsive concept for future airship’s transport
  126. Vizinho, R., Pascoa, J., and Silvestre, M., (2013) “High Altitude Transitional Flow Computation for a Propulsion System Nacelle of MAAT Airship,” SAE International Journal Aerospace, Vol. 6, No. 2, pp.714-720.
    High Altitude Transitional Flow Computation for a Propulsion System Nacelle of MAAT Airship
  127. Esmaili, Q., Ranjbar, A. A., & Abdollahzadeh, M. (2013). Numerical simulation of a direct methanol fuel cell through a 1D+ 1D approach. International journal of green energy, 10(2), 190-204.
    Numerical simulation of a direct methanol fuel cell through a 1D+1D approach
  128. Xisto C.M., Páscoa J. C. , Oliveira P.J. (2013), “A pressure-based method with AUSM-type fluxes for MHD flows at arbitrary Mach numbers”, International Journal for Numerical Methods in Fluids, Vol. 72, No. 11, pp. 1165–1182.
    A pressure-based method with AUSM-type fluxes for MHD flows at arbitrary Mach numbers
  129. Trancossi M., Dumas A., Madonia M., Páscoa J., Vucinic D. (2012), “Fire-safe airship system design”, SAE International Journal of Aerospace, Vol. 5, No. 1: pp. 11-21.
    Fire-safe Airship System Design
  130. Páscoa J. C., Mendes N. M., Brójo F. M., Santos F. S., Fael P. O. (2012) “An innovative experimental on-road testing method and its demonstration on a prototype vehicle”, Journal of Mechanical Science and Technology, Vol. 26, No. 6, pp 1663-1670.
    An innovative experimental on-road testing method and its demonstration on a prototype vehicle
  131. Páscoa J. C., Silva F. J., Pinheiro J. S., Martins D. J. (2012), “A new approach for predicting PAT-pumps operating point from direct pumping mode characteristics”, Journal of Scientific & Industrial Research, Vol. 71, pp. 144-148.
    A new approach for predicting PAT-pumps operating point from direct pumping mode characteristics
  132. Ilieva G., Páscoa J.C., Dumas A., Trancossi M. (2012), “A critical review of propulsion concepts for modern airships”, Central European Journal of Engineering, Vol. 2, No. 2, pp 189-200.
    A critical review of propulsion concepts for modern airships
  133. Xisto C.M., Páscoa J. C. , Oliveira P.J., Nicolini D.A. (2011), “An hybrid pressure-density based algorithm for the Euler equations at all Mach number regimes”, International Journal for Numerical Methods in Fluids, Vol. 70, No. 8, pp. 961–976.
    A hybrid pressure-density-based algorithm for the Euler equations at all Mach number regimes
  134. Páscoa J. C. (2011) “Benchmark test cases for CFD in mechanical engineering”, Central European Journal of Engineering, Vol 1(4), pp. 333. (Editorial).
    Benchmark test cases for CFD in mechanical engineering
  135. Páscoa J. C., Silva F. J., Pinheiro J. S., Martins D. J. (2010), “Accuracy details in realistic CFD modeling of an industrial centrifugal pump in direct and reverse modes”, Journal of Thermal Science, Vol. 19, No. 6, pp. 491-499.
    Accuracy details in realistic CFD modeling of an industrial centrifugal pump in direct and reverse modes
  136. Páscoa J. C., Xisto C. M., Göttlich E. (2010), “Performance assessment limits in transonic 3D turbine stage blade rows using a mixing-plane approach”, Journal of Mechanical Science and Technology, Vol. 24, No. 10, pp. 2035-2042.
    Performance assessment limits in transonic 3D turbine stage blade rows using a mixing-plane approach
  137. Páscoa J. C., Mendes A. C., Gato L.M.C. (2009), “A fast iterative inverse method for turbomachinery blade design”, Mechanics Research Communications, Vol. 36, No. 5, pp. 537-546.
    A fast iterative inverse method for turbomachinery blade design
  138. Páscoa J. C., Luff J. K., McGuirk J. J., Mendes A. C., (2006), “On Accurate Numerical Modeling of 3D Turbulent Flow Through a DCA Compressor Cascade and its Experimental Validation”, International Journal of Dynamics of Fluids, Vol. 2(1), pp. 1–18.
  139. Páscoa J. C., Mendes A. C., Gato L.M.C., Elder R., (2004), “Aerodynamic Design of Turbomachinery Cascades Using an Enhanced Time-marching Finite Volume Method”, Journal of Computer Modeling in Engineering & Sciences, Vol. 6(6), pp. 537–546.
  140. Páscoa J. C., Mendes A. C., Gato L. C., (2004), “An Inverse Method for Turbomachinery Cascades of Blades – Investigation of the existence and uniqueness of solution”, WIT Transactions on Engineering Sciences, Vol. 40, pp. 312-322.
  141. Páscoa J. C., Mendes A. C., Gato L. C., (2002), “An Efficient Finite Volume Scheme with Improved Artificial Viscosity Suitable for Transonic flow Calculations”, WIT Transactions on Engineering Sciences, Vol. 32, pp. 505-514.
  142. Mendes A. C., Páscoa J. C., Kolodziej J. A., (1998), “An Alternative Approach to Integral Equation Method Based on Trefftz Solution for Inviscid Incompressible Flow”, WIT Transactions on Engineering Sciences, Vol. 18, pp. 57-68.
error: Content is protected !!